The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Tue Apr 16, 2024 6:36 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 238 posts ]  Go to page Previous 112 13 14 15 16
Author Message
PostPosted: Sun Apr 07, 2013 10:09 pm 
I'd forgotten how good that 3M stuff was Howard.

What are you doing to it now! Result on the MOT pass mate, well done.


Top
   
PostPosted: Sun Apr 07, 2013 11:30 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Quote:
Good to see you today Howard, I hope the engine proves to be a good'un for you. :D
And you too - good to catch up again!

Quote:
What are you doing to it now!
What you see there is a 1300 engine that is correct for a Spitfire MKIV! It's been reconditioned at some point in the past, possibly around 1997, and has had little to no use since. I can finally get rid of the leaky and knocking Midget 1500 lump that's currently in the car :D

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Thu Oct 31, 2013 12:47 am 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
The Spitfire's MoT runs out in a couple of weeks, so I've spent a number of evenings going over the car to make sure it was in the best possible condition for the test.

1. Fitted a new indicator arm as the old one burst in to flames along the M4. Inside the old switch I found the rather charred remains of a spider! Poor thing.

2. Tightened up both front wheel bearings one flat on the nut to bring them back up to the correct tolerance.

3. Removed and refitted the wiper spindle boxes the correct way round to cure the wiper parking issue detailed in a previous post. Not an easy job as they're right up underneath the dashboard with pretty much everything obscuring access. For the first time ever I now have windscreen wipers that self-park!

4. During the wiper spindle reassembly I somehow got tangled up in the windscreen washer tubing which promptly broke off where it connects to the electric pump (and covered me in washer fluid!). It was an ugly modern bottle (with a built-in pump) anyway, so I was rather glad to get rid of it. I've now fitted an original washer bottle and electric pump from a late Spitfire 1500.

Anyway, the MoT was this morning.. and it passed! Flying colours and not even an advisory :mrgreen:

Photos to follow, but I've been working on the car in the dark!

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Fri Oct 31, 2014 3:14 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Another year has passed and it's MoT time again!

For the last few years the car has flown through the MoT, but this year I am faced with some issues that need to be fixed in order for the car to pass. The exhaust downpipe recently cracked on the motorway, the slightly iffy off-side sill has gone crusty and the driver's floor needs patching. Also, not MoT failure points, but there’s also the matter of the rusty front wing/wheelarch, the rusty passenger door and the knackered engine to sort out.

So after spending the last couple of years saving up, sourcing various panels and locating a decent engine, the car is now in the hands of Derek (autonet7) at Autopride in Guildford for a comprehensive makeover :mrgreen:

Sill:

Image

Door:

Image

Image

Wing:

Can't find a "before" photo :oops: )

The replacement parts I have are:

Image

Image

Image

Image

Image

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Last edited by Howard81 on Fri Oct 31, 2014 3:25 pm, edited 2 times in total.

Top
   
PostPosted: Fri Oct 31, 2014 3:16 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Unfortunately the state of the off-side sill was much worse than initially thought - lots of filler and Derek pulled a doughnut packet out of it! If you look in the photos below you’ll also notice that the inner sill strengthening panel was missing completely (806635 shown here: http://www.rimmerbros.co.uk/ImagePopUp. ... GRID005872). Quite why someone had gone to the effort of replacing the outer sill and missing out the inner strengthening panel is beyond belief, especially when you consider it costs less than £10! Anyway, the sill is now rot free (complete with inner strengthening panel) and as good as new.

It was a similar story with the floorpan. The rear half was replaced a couple of years ago but on the front there was a bit of crispyness around one of the drain holes. By the time this was cut back to good metal, half the front floorpan had been cut out! Derek has made a great job of this, welding in a section from a scrap panel complete with strengthening ribs pressed in.

So that’s everything up to date with the photos I have, stay tuned for further updates!

Image

Image

Image

Image

Image

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Sat Nov 01, 2014 1:38 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
No no no Howard you cant have a sensible exhaust like that.....

It has to be the twin straight through pipes.....

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
PostPosted: Sat Nov 01, 2014 1:57 am 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Quote:
No no no Howard you cant have a sensible exhaust like that.....

It has to be the twin straight through pipes.....
I hear you Jon, but the Sports system and fancy manifold would be near on three times what I paid for this standard exhaust.

The Spit gets far too much attention as it is.. plus I already have the Sprint to terrorise the locals with :twisted:

So the Spit is staying standard.. for now.. :lol:

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Sat Nov 01, 2014 5:52 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Wed Oct 04, 2006 8:10 pm
Posts: 1264
Location: Darn saarf..
Standard exhaust gets my vote..super cool! 8)

Thanks for the pics and update.. great to see it looking better.. :D


Top
   
PostPosted: Wed Jul 22, 2015 9:33 pm 
Hey Howard, long time no news :(

How goes the Spittie and the Sprint?

PS: what colour was the Halfords paint for the green Dolly? I can't recall now :(


Top
   
PostPosted: Sat Jul 25, 2015 11:26 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
Brooklands green...the Halfrauds effort is a reasonable match.

I had one...

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
PostPosted: Sun Jul 26, 2015 6:58 am 
Cheers Jonners, just looked through the thgread (which is what I should have done in the first place). Brooklands Green - code HYF :)

I seem to remember that it was a pretty decent match and faded in to almost perfect over a few months.


Top
   
PostPosted: Sun Jul 26, 2015 9:40 am 
Offline
TDC Member
User avatar

Joined: Tue Oct 03, 2006 5:48 pm
Posts: 8456
Location: Winscombe, North Somerset, England
Brooklands Green code is HAE Ken, or is that the Halfords code?

_________________
Sprintless for the first time in 35+ years. :boggle2: ... Still Sprintless.

Engines, Gearboxes, Overdrives etc. rebuilt. PM me.


1997 TVR Chimaera 450


Image


Top
   
PostPosted: Sun Jul 26, 2015 11:33 am 
Sorry Mart, that was Halfrauds code.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 238 posts ]  Go to page Previous 112 13 14 15 16

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited