Hi everyone, I thought it is about time I put up a project thread after being a member on here for a while.
I originally intended on using the CA18DET from a nissan s13 that I had lying around but since then I have changed my mind and gone down another route. I am now planning to install a 2.0 Fiat twin cam into my Toledo. The reason for this engine choice is that after owning a Vauxhall chevette that I put a 16v Corsa engine into, with a modern engine there is far too much wiring and things that can go wrong. Give me a carb and a dizzy any day of the week
So after knowing I'd like to make a Fiat powered Toledo I went on the hunt for a suitable engine and gearbox. Fortunately after not too long of a search I was able to find a good 2.0 Engine and manual gearbox at a very good price.
So I'll let some pictures do the talking:
Here is the engine and gearbox when I picked it up:
Here is the gearbox after a long time with a wire brush and then following a coat of paint:
Here is the engine after stripping of all seals and ancilliarys: I replaced all the seals, cambelt and tensioner, water pump etc I fitted new core plugs and gave the block a coat of gloss black:
And here is the finished article, bolted upto the box with a new clutch and refaced flywheel. All ready to go into the car whenever I can book some time off work!
I'll keep this updated as and when I do anything.