The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 7:50 pm

All times are UTC




Post new topic  Reply to topic  [ 300 posts ]  Go to page Previous 113 14 15 16 1720 Next
Author Message
PostPosted: Fri Oct 06, 2017 12:53 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
no baffles inside as my metal tank has none either,so tried to keep it the same
did original dolly tanks come with baffles? ive got 77 and 80 both have no baffles
not sure on volume of tank but cant be far off 57L/12.5gallons,il be happy with 50L tank,saves on carrying excess fuel

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Fri Oct 06, 2017 3:00 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
just measured the tank,and calculated on website convertor that the tank is 44.6L,so lost 12L,that includes the mod to be done

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Fri Oct 06, 2017 3:55 pm 
Offline
TDC Staffs Area Organiser
User avatar

Joined: Wed Oct 18, 2006 2:08 pm
Posts: 5429
Location: The Old Asylum
There aren't any baffles as such but there is a small container within the tank where the sender sits which acts as a baffle for the sender unit.

It does look quite nice though I think if I were fitting an alternative tank I'd look to fit a foam filled jobbie for safety, the tank is in just about the worst position in the event of a rear bump.

_________________
Mark

1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30


Top
   
PostPosted: Fri Oct 06, 2017 4:28 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
in my tank there no container at all,tank from the 77 dolly i got

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Fri Oct 06, 2017 8:12 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1699
Location: Harrow Middlesex
Quote:
in my tank there no container at all,tank from the 77 dolly i got
The reason you would have small container inside the tank by the pick up,is when you get low on fuel,it will slosh about and could loose the fuel around the pick up pipe,and the car could cut out as no fuel would be pumped

Dave


Top
   
PostPosted: Sat Oct 07, 2017 3:13 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
AS OE the tank capacity was 12.5 gallons....nice long range at 40 mpg.

There should be baffles around the tank sender flat arm, which makes fitting it a bit of an art, but worthwhile to stop it
flopping up and down too quick as the level drops and the fuel sloshes around.

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
PostPosted: Sat Oct 07, 2017 3:33 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
thanks for comment,,nice one
drop tank off for mods last night,just phoned now-explained,he`s on it

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Sun Oct 08, 2017 3:59 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1699
Location: Harrow Middlesex
Quote:
thanks for comment,,nice one
drop tank off for mods last night,just phoned now-explained,he`s on it
[/quot

what's it made from alli or stainless ? It looks nice

Dave


Top
   
PostPosted: Mon Oct 09, 2017 11:04 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
alloy 3mm

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Sat Nov 04, 2017 9:03 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
got the fuel tank back. needs fettling to fit

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Thu Dec 28, 2017 5:24 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
yesterday,bought a new in box fuel sender unit(2pin)now got a spare,not done nothing to alloy tank as its needs work,may have to buy tig welder :D thinking of selling the red dolly on :( but browny is still good,rear window demister works 8) now done 63600`ish since i got it

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Wed Aug 08, 2018 10:35 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
well,its been a while since last post
not much has happened since still the same,but over the past month few problems
steering knuckle lower part rubbers were gone,cracked and few have gone somewhere :shock: got new poly`s ready to fit,but for now carmine-dolly has no steering,browny spot on now 8)
then...the drivers bottom ball joint start making a noise,changed that from carmine-dolly and all mint,got new ones here ready to fit,but first...mod to fit grease nipple

thats it for now :bluewave:

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Wed Aug 08, 2018 12:36 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 15, 2013 9:36 am
Posts: 88
Location: nottingham
Any luck with your alloy tank?

_________________
1980 Russet 1850hl


Top
   
PostPosted: Wed Aug 08, 2018 1:59 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
yeah got an alloy built,not to original spec even tho a spare one was given as template but it the shape`ish of one,no pick up tube but there is a feed out and its flat bottomed.....so all in all its a start of something

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Thu Aug 09, 2018 3:43 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
just tidy`d up the driver side bottom doors and rear arch,need cutting back to blend in


Attachments:
IMG_1676.JPG
IMG_1676.JPG [ 104.79 KiB | Viewed 24108 times ]

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 300 posts ]  Go to page Previous 113 14 15 16 1720 Next

All times are UTC


Who is online

Users browsing this forum: Google and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited