The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Tue Apr 16, 2024 7:44 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 300 posts ]  Go to page Previous 16 7 8 9 1020 Next
Author Message
PostPosted: Thu Aug 06, 2015 5:36 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
today a good day,,,steering rack gaitors re-newed along with re-greasable track rod ends(waiting for paint to dry) engine had a oil and filter change,bit of tune up,,next is to re-bleed the brake system,,,roll on mot

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Wed Sep 02, 2015 8:21 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
booked in MOT tomorrow

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Thu Sep 03, 2015 11:35 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
PASSED with no advisorys


Attachments:
IMG_3277.JPG
IMG_3277.JPG [ 257.3 KiB | Viewed 10240 times ]

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Last edited by Toledo Man on Thu Sep 03, 2015 8:04 pm, edited 1 time in total.
Resized the photo.
Top
   
PostPosted: Thu Sep 03, 2015 8:06 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:52 pm
Posts: 7567
Location: Halifax, West Yorkshire
Congrats on the MoT pass. I had to resize the photo because it was too big.

_________________
Toledo Man

West Yorkshire Area Organiser & forum moderator
Meetings take place on the first Wednesday of the month at 8.00pm at The Old Brickworks, Wakefield Road, Drighlington, Bradford, BD11 1EA

1972 Dolomite 1850 auto (NYE 751L - Now for sale)
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - another project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle


Top
   
PostPosted: Sat Oct 31, 2015 11:20 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
thanks toledo man for resizing the picture

dolly still good as gold,well brown gold atleast,runs like a dream,but boredom has set in,cos got nothing to do now,,must get a project soon

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Sat Oct 31, 2015 11:42 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:52 pm
Posts: 7567
Location: Halifax, West Yorkshire
I'm sure you will find something that needs doing or you could fulfil your "wish list". Although I'm at the stage where I can use my 1850, I'm still finding lots of little jobs that need doing.

What you need to do is to enjoy the fruits of your labour and use the car. They are an absolute joy to drive. Do you fancy coming to the next West Yorkshire meeting? (if you don't have any other "commitments") It would be the perfect excuse to take your Dolly out for a run.

_________________
Toledo Man

West Yorkshire Area Organiser & forum moderator
Meetings take place on the first Wednesday of the month at 8.00pm at The Old Brickworks, Wakefield Road, Drighlington, Bradford, BD11 1EA

1972 Dolomite 1850 auto (NYE 751L - Now for sale)
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - another project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle


Top
   
PostPosted: Tue Nov 03, 2015 8:47 pm 
Really like this Dolly!! Hope you and the car are well! Kind Regards Russell


Top
   
PostPosted: Tue Nov 03, 2015 10:24 pm 
There's that rear number plate light to sort out!
:)


Top
   
PostPosted: Sat Mar 26, 2016 1:24 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
car running great and healthy,no problems at all,,just bought a rear bumper plinth to change over for the number plate light

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Sat Mar 26, 2016 5:36 pm 
Offline
TDC Member

Joined: Fri Jan 08, 2016 9:00 pm
Posts: 1014
Great to hear finished success stories. :) Of course they're never finished.....


Top
   
PostPosted: Wed Apr 06, 2016 1:15 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
plinth dont fit :cry: ,,,need to find rear middle section of bumper that accepts plinth light,not 2 round lights(if that makes sense)

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Wed Apr 06, 2016 8:16 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:52 pm
Posts: 7567
Location: Halifax, West Yorkshire
Is it the early type that you want? I have one spare.

_________________
Toledo Man

West Yorkshire Area Organiser & forum moderator
Meetings take place on the first Wednesday of the month at 8.00pm at The Old Brickworks, Wakefield Road, Drighlington, Bradford, BD11 1EA

1972 Dolomite 1850 auto (NYE 751L - Now for sale)
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - another project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle


Top
   
PostPosted: Sat Apr 09, 2016 12:36 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
Quote:
Of course they're never finished.....
your so right,,,just had to replace the window squirty pump and just bought new clutch master,cos i dont know how long the original has been on,and it look bit manky

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Tue Apr 26, 2016 7:08 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
buggar :( just bought few days ago a seal kit for the clutch slave,now it turns out to be wrong one for it,seams ive got spitfire internals
so now,do i get spitfire seal kit or do i look for the original seal kit for dolly with plunger,but the plunger is all i need,any one got one?

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
PostPosted: Wed May 04, 2016 2:33 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 760
Location: NORTH NOTTS
giving the car a check after clutch seal kit replacement,ive have noticed that the panel on what the clutch master sits on is flexing!
all screw and bolt are tight but still flexing,gearbox tunnel cover has all the screws inplace
any ideas anyone?

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 300 posts ]  Go to page Previous 16 7 8 9 1020 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited