We started stripping the paint off today...
Once the paint stripper has been applied it's a good idea to cover it with some plastic. We use bin bags (cut off the bottom & cut it up the middle). This helps the stripper to do it's job. See how I posed the paint stripper container.
Mary getting in those awkward places...
I started to do a bit of dual actioning but run out of pads and also my camera batteries died as I was about to take some close-ups of the not-so-good spots.
Apart from what Ken has mentioned there is a dent on the top of the RH front wing just above where the aerial hole has been filled in. The roof has a couple of dents in which will probably push out once we remove the headlining. The driver's door has a few holes along the bottom edge. There is a small dent on the RH passenger door and there is a hole on the RH rear wing, right at the bottom where it joins the rear valance. It's looking a bit flaky where the valance & boot floor meet but I haven't stripped that bit yet. I'm sure there will be more to come but nothing unexpected really. Fingers crossed.
_________________
Sprintless for the first time in 35+ years.
... Still Sprintless.
Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
1997 TVR Chimaera 450