The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 6:41 pm

All times are UTC




Post new topic  Reply to topic  [ 257 posts ]  Go to page Previous 110 11 12 13 1418 Next
Author Message
PostPosted: Mon Aug 22, 2016 9:25 pm 
Quote:
Going for the sleeper look? Or just laziness?

Steve
Going to put the alloys back on once I've sorted them out so didn't see the point spending lots of time making the steels look like new when they arnt going to be on the that long.


Top
   
PostPosted: Mon Oct 17, 2016 10:13 pm 
Recently I have just been doing little bits to car and also getting it ready for its mot next month. I have got a few pics that I will upload at some point. So the bits I've been fiddling with are taking apart and cleaning the door locks and they were getting stiff and while the door cards were off I lubricated the window winders. I had a smell of petrol in the car so I removed the in tank fuel pump and re sealed it. Fitted a new number plate light as the insides were too rusty to save. Fitted new brake discs and ebc green pads. It stops alot quicker now and I adjusted the rear brakes.


Top
   
PostPosted: Thu Oct 27, 2016 10:28 pm 
Finally got round to uploading pics.


Attachments:
File comment: Broken wire on reverse light switch
IMG_20161027_222804.jpg
IMG_20161027_222804.jpg [ 249.36 KiB | Viewed 11919 times ]
File comment: Soldered new wires on switch
IMG_20161027_222845.jpg
IMG_20161027_222845.jpg [ 217.89 KiB | Viewed 11919 times ]
File comment: Fuel pump suction filter
IMG_20161027_222916.jpg
IMG_20161027_222916.jpg [ 177.82 KiB | Viewed 11919 times ]
File comment: Re sealed fuel pump in tank and fitted boot liner
IMG_20161027_222948.jpg
IMG_20161027_222948.jpg [ 171 KiB | Viewed 11919 times ]
File comment: Before new breaks were fitted
IMG_20161027_223018.jpg
IMG_20161027_223018.jpg [ 165.6 KiB | Viewed 11919 times ]
File comment: New and old disc
IMG_20161027_223047.jpg
IMG_20161027_223047.jpg [ 149 KiB | Viewed 11919 times ]
File comment: New brakes fitted
IMG_20161027_223119.jpg
IMG_20161027_223119.jpg [ 160.4 KiB | Viewed 11919 times ]
Top
   
PostPosted: Thu Nov 03, 2016 9:05 pm 
As the mot is coming up I thought I'd sort out the saggy rear end! Treated dolly to some new shocks and lowered springs. When I got the old units off I was able to spin and move the springs on the shocks! That would explain the rattling noise then! Didn't even need to use spring compressors to remove the top mounting plate. It sits at a better hight now and doesn't ground out also the handling has improved by miles and I've lost a vibration I had at over 50mph. It's a nice smooth drive now. Sorry about the quality of the pics was doing it outside. The ride hight has dropped a tiny bit now it's done a few miles and settled in.


Attachments:
File comment: New shock and spring
IMG_20161103_210515.jpg
IMG_20161103_210515.jpg [ 157.22 KiB | Viewed 11879 times ]
File comment: Ride hight on old units
IMG_20161103_210552.jpg
IMG_20161103_210552.jpg [ 109.18 KiB | Viewed 11879 times ]
File comment: Ride hight on new units
IMG_20161103_210625.jpg
IMG_20161103_210625.jpg [ 124.97 KiB | Viewed 11879 times ]
Top
   
PostPosted: Thu Nov 10, 2016 9:02 pm 
Today dolly had its mot. It passed with only a couple of advisories. Super and lower front ball joints have slight play. If they were greaseable then they wouldn't have any play in them. Might be fitting grease nipples to some new ones if they don't come with any.


Top
   
PostPosted: Thu Nov 10, 2016 9:36 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
If you can find any, some original upper balljoints came with grease nipples. these are the much prized repairable ones which I believe the club (or possibly Alun) has rebuild kits for. So they are effectively "everlasting".
As far as I am aware, NO lower balljoints came greaseable, however I have been tempted lately to experiment with installing a grease point in one of the several used ones I have in stock - how hard can it be? If this works then I have a number of NOS lower balljoints that could benefit from the same treatment before I market them.

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Sat Nov 12, 2016 12:22 pm 
Offline
TDC Member
User avatar

Joined: Mon Nov 07, 2011 9:57 am
Posts: 713
Location: Dorset
Quote:
If you can find any, some original upper balljoints came with grease nipples. these are the much prized repairable ones which I believe the club (or possibly Alun) has rebuild kits for. So they are effectively "everlasting".
As far as I am aware, NO lower balljoints came greaseable, however I have been tempted lately to experiment with installing a grease point in one of the several used ones I have in stock - how hard can it be? If this works then I have a number of NOS lower balljoints that could benefit from the same treatment before I market them.

Steve
I thought some of the early stuff (1300, TC etc) had greasable lowers? I might be wrong. I think I have a spare (in need of a rebuild) top laying around somewhere if anyone wants it.

Steve


Top
   
PostPosted: Sun Nov 13, 2016 9:33 pm 
So the old girl did well this weekend. Made it to Wales and back! The only thing that went wrong was the knob fell off my window winder handle! Went to get some bits off Richard who's doing a fantastic job on his restoration. A bit of woe and a lot of happiness.


Top
   
PostPosted: Mon Nov 14, 2016 4:23 pm 
Offline
TDC Member
User avatar

Joined: Mon Nov 07, 2011 9:57 am
Posts: 713
Location: Dorset
Quote:
So the old girl did well this weekend. Made it to Wales and back! The only thing that went wrong was the knob fell off my window winder handle! Went to get some bits off Richard who's doing a fantastic job on his restoration. A bit of woe and a lot of happiness.
You don't want your knob falling off! They do appear to wear out a bit with age though.


Top
   
PostPosted: Mon Nov 14, 2016 9:07 pm 
Quote:
Quote:
So the old girl did well this weekend. Made it to Wales and back! The only thing that went wrong was the knob fell off my window winder handle! Went to get some bits off Richard who's doing a fantastic job on his restoration. A bit of woe and a lot of happiness.
You don't want your knob falling off! They do appear to wear out a bit with age though.
It's never good when they fall off.lol. the e clip wore through the stub and fell off. Just going to swap it with a rear one for now.


Top
   
PostPosted: Tue Nov 15, 2016 9:56 pm 
Nothing worse than your knob falling off and leaving you with just a stub. :shock:


Top
   
PostPosted: Wed Nov 23, 2016 10:03 pm 
Latest update is I've repaired both rear wings. They still need finishing off properly but they are both solid with no holes and roughly the colour of the car. I've also ordered a set of 4 ball joints for the front suspension as they car is wondering a little now! I apologise if the pics come out in the wrong order coz there are a few!


Attachments:
IMG_20161123_220001.jpg
IMG_20161123_220001.jpg [ 139.91 KiB | Viewed 11680 times ]
IMG_20161123_220041.jpg
IMG_20161123_220041.jpg [ 139.85 KiB | Viewed 11680 times ]
IMG_20161123_220120.jpg
IMG_20161123_220120.jpg [ 124.64 KiB | Viewed 11680 times ]
IMG_20161123_220156.jpg
IMG_20161123_220156.jpg [ 132.35 KiB | Viewed 11680 times ]
IMG_20161123_220231.jpg
IMG_20161123_220231.jpg [ 125.75 KiB | Viewed 11680 times ]
IMG_20161123_220305.jpg
IMG_20161123_220305.jpg [ 102.06 KiB | Viewed 11680 times ]
IMG_20161123_220334.jpg
IMG_20161123_220334.jpg [ 110.59 KiB | Viewed 11680 times ]
IMG_20161123_220402.jpg
IMG_20161123_220402.jpg [ 118.65 KiB | Viewed 11680 times ]
IMG_20161123_220436.jpg
IMG_20161123_220436.jpg [ 110.53 KiB | Viewed 11680 times ]
IMG_20161123_220513.jpg
IMG_20161123_220513.jpg [ 102.62 KiB | Viewed 11680 times ]
Top
   
PostPosted: Wed Nov 23, 2016 10:05 pm 
Some more pics


Attachments:
IMG_20161123_215326.jpg
IMG_20161123_215326.jpg [ 138.6 KiB | Viewed 11680 times ]
IMG_20161123_215357.jpg
IMG_20161123_215357.jpg [ 133.01 KiB | Viewed 11680 times ]
IMG_20161123_215433.jpg
IMG_20161123_215433.jpg [ 137.06 KiB | Viewed 11680 times ]
IMG_20161123_215520.jpg
IMG_20161123_215520.jpg [ 134.96 KiB | Viewed 11680 times ]
IMG_20161123_215604.jpg
IMG_20161123_215604.jpg [ 148.69 KiB | Viewed 11680 times ]
IMG_20161123_215640.jpg
IMG_20161123_215640.jpg [ 132.38 KiB | Viewed 11680 times ]
IMG_20161123_215714.jpg
IMG_20161123_215714.jpg [ 170.99 KiB | Viewed 11680 times ]
IMG_20161123_215747.jpg
IMG_20161123_215747.jpg [ 170.56 KiB | Viewed 11680 times ]
IMG_20161123_215835.jpg
IMG_20161123_215835.jpg [ 147.76 KiB | Viewed 11680 times ]
IMG_20161123_215920.jpg
IMG_20161123_215920.jpg [ 170.09 KiB | Viewed 11680 times ]
Top
   
PostPosted: Wed Nov 23, 2016 10:07 pm 
Some more


Attachments:
IMG_20161123_215059.jpg
IMG_20161123_215059.jpg [ 121.15 KiB | Viewed 11680 times ]
IMG_20161123_215133.jpg
IMG_20161123_215133.jpg [ 129.98 KiB | Viewed 11680 times ]
IMG_20161123_215205.jpg
IMG_20161123_215205.jpg [ 118.07 KiB | Viewed 11680 times ]
IMG_20161123_215238.jpg
IMG_20161123_215238.jpg [ 149.51 KiB | Viewed 11680 times ]
Top
   
PostPosted: Sun Nov 27, 2016 10:33 pm 
Got a little more done to the dolomite over the weekend. My new ball joints arrived so I fitted them. Then I realised the front wheels aren't facing the same direction. As I couldn't get the car on the ramp I roughly adjusted the tracking with a tape measure and it already handles better. As soon as I can get it on the ramp I will do the tracking properly.


Attachments:
IMG_20161127_223623.jpg
IMG_20161127_223623.jpg [ 191.46 KiB | Viewed 11608 times ]
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 257 posts ]  Go to page Previous 110 11 12 13 1418 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited