The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Fri Mar 29, 2024 12:19 pm

All times are UTC




Post new topic  Reply to topic  [ 328 posts ]  Go to page Previous 1 2 3 4 5 622 Next
Author Message
PostPosted: Sat Feb 03, 2018 9:37 am 
Quote:
What's the secret of 1850 head removal then please James ? That looked just so easy from the piccys
The "head-masters secret".


Could be nylon rope pushed into the cylinders through the sparkplug hole, them crank the engine to force the head up.
Could be hardwood wedges hammered between the block and head.
Could be a purpose made tool.

Will we ever find the secret?


Top
   
PostPosted: Sat Feb 03, 2018 9:48 am 
Offline
TDC Cheshire Area Organiser

Joined: Wed May 17, 2017 6:28 pm
Posts: 1405
Location: NANTWICH.
I think he is just teasing us, if it has come off that easy? maybe he should go and buy a lottery ticket :lol: :lol:

_________________
NOW A CLUB MEMBER 2017057 :bluewave:


Top
   
PostPosted: Sat Feb 03, 2018 11:28 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sun Oct 21, 2012 11:15 pm
Posts: 821
Quote:
Quote:
What's the secret of 1850 head removal then please James ? That looked just so easy from the piccys
The "head-masters secret".


Could be nylon rope pushed into the cylinders through the sparkplug hole, them crank the engine to force the head up.
Could be hardwood wedges hammered between the block and head.
Could be a purpose made tool.

Will we ever find the secret?
That rope idea is genius. does it work?

_________________
1980 Dolomite Sprint Track Day Car....KLJ 895W. now redtopiffied :P

viewtopic.php?f=19&t=23031

Volkswagen Golf MK3 Gti....R301UUJ. RIP 22-5-13
Volkswagen Golf MK4 TDGTI 150 MM53VNT Sold 7-8-17
BMW 320d Coupe M-Sport YL08 XBZ with factory fitted Performance Pack - Sold 22/05/21
BMW 330d Touring M-Sport WN63 XPY - best daily ever

Proud TDC Member!


Top
   
PostPosted: Sat Feb 03, 2018 12:02 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
Quote:
I think he is just teasing us, if it has come off that easy? maybe he should go and buy a lottery ticket :lol: :lol:
:lol: :lol: :lol:

So the secret is brass (or at least I think they are brass) wedges very carefully driven in between the block and head. I have done this on the engines I have picked up from various places, some have been left standing for ages and it always works. If you are careful there is no damage to the block or head as the wedges are a softer material.

You need to remove the timing gear, chain, guides etc...

Take out as many studs as you can and soak the rest in penetrating oil, I used diesel.

I then drive the wedges in just under the exhaust ports and in the same place on the opposite sides. The aim is to get the head moving thus breaking the corrosive resistance on the stud. If you are lucky then you can just remove the stud. If not you can then you can raise the head enough so that the stud is flush with the hole, then you have a well in which to get more penetrating fluid in. So with a soak, some up and down jiggery pokery and some choice words the head slides off. Then I use a very big Laser stud remover to remove the studs from the block. This does damage the studs but I'm replacing them with Nickel plated ones so I don't care.

Of course it helps if you have my engine stand mount as the head is then mounted horizontal. :wink:

Tony's new tool that he is designing will work better though.


Top
   
PostPosted: Sat Feb 03, 2018 12:21 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
The engine has done a genuine 90k, I have the MOTs so it will be interesting to see what the internal condition is.

The amount of sludge coming from the sump wasn't a good start!

Image

It's a bit dirty in there but not too bad, the sludge was confined to the bottom of the sump.

Image

Image

Pistons came out easily, number 1 needed a knock but thats a cylinder that I had a compression problem on.

Just need to pull the water pump and jackshaft and I can get on and clean it and get the cylinders honed. They cylinders are very good, they look look like they only need a hone, I'll measure everything once it's all clean.

Image

Image

Everything ready to be cleaned.

Image

Bearings look pretty standard for 90k, all standard size VP. No damage to the journals I'll just get the crank polished.

Image

Image

This is the problematic no 1 piston, the rings are stuck and it's filthy, it will clean up ok though. All the oil control rings are gummed up but that's to be expected.

Image

Image

The rest of the pistons are in superb condition with minimal thrust face wear. They will all clean up and can be used again with new rings.

Image


Top
   
PostPosted: Sat Feb 03, 2018 12:45 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Wed Jul 22, 2015 12:58 pm
Posts: 1293
Location: London
:thumbsup:

Let me know when your free for a engine dismantle and desludge.

_________________
NRW 581W Sprint


On the motorway no one can hear me sing!
Construed as a public service, self preservation in reality.


Top
   
PostPosted: Sat Feb 03, 2018 12:55 pm 
Quote:
Quote:
Quote:
What's the secret of 1850 head removal then please James ? That looked just so easy from the piccys
The "head-masters secret".


Could be nylon rope pushed into the cylinders through the sparkplug hole, them crank the engine to force the head up.
Could be hardwood wedges hammered between the block and head.
Could be a purpose made tool.

Will we ever find the secret?
That rope idea is genius. does it work?
I haven't done it that way myself but if I was to I would probably take the camshaft out first so that the valves are seated and don't get bent. It is a last resort procedure. I have always had success using James' method but with wooden wedges.


Top
   
PostPosted: Tue Feb 06, 2018 2:22 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
I am waiting for the block to be honed and some parts to arrive, everything has had an initial clean just so I can strip the pistons oil pump etc... Suprisingly it has all come up rather well, the sump had about a 15mm layer of sludge in the bottom which took ages to get rid of!

Image

Engine reassembly can be done in the evenings, the most pressing issue for me is the welding which needs to be completed in the next week or so to keep me on track for the NEC.

I striped the bulkhead pad off mainly to gain access to weld the bulkhead fatiuge crak with ease, I also wanted to check for any other areas for rust, there are none!

Image

The fatigue crack will be easy to repair, I have a reinforcing plate when it all goes back together.

Image

I finished stripping the trim from the body, bumper off etc... and the rust on the drivers side isn't too bad, easily repairable.

Image

Lots of body filler on the passenger side.

Image

It will look better once stripped back, the rust is only confined to the outer panels and the valence isn't difficult to fix but the wing is a real pain, I can fab a panel for it but I need an english wheel to get the curvature all nice and flat.

Image

Sods law I just sold my wings from YGD to Graham! Actually they were way to good to cut up. I will have to have a think about how to tackle this area. Ideally I need a passenger wing that has some damage closer to the door that I can cut up.

On to the rest of the car and there are a couple of holes in the rear passenger wheel well, and a small hole in the drivers sill behind the wing. Both about the size of a 10p and should be easy to repair.

I am still trying to decide weather or not to strip off the ziebart from the engine bay.


Top
   
PostPosted: Tue Feb 06, 2018 3:21 pm 
Offline
TDC Staffs Area Organiser
User avatar

Joined: Wed Oct 18, 2006 2:08 pm
Posts: 5429
Location: The Old Asylum
Quote:
I am still trying to decide weather or not to strip off the ziebart from the engine bay.
I would, horrible stuff

_________________
Mark

1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30


Top
   
PostPosted: Tue Feb 06, 2018 3:23 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
Quote:
Quote:
I am still trying to decide weather or not to strip off the ziebart from the engine bay.
I would, horrible stuff
I really hate it! How do you get it off? Scraper?


Top
   
PostPosted: Tue Feb 06, 2018 3:38 pm 
Offline
TDC Staffs Area Organiser
User avatar

Joined: Wed Oct 18, 2006 2:08 pm
Posts: 5429
Location: The Old Asylum
Soften with white spirit and then scrape off gently in my experience. You could also use some car tar remover like Autoglym but this is quite expensive so white spirit is probably better.

_________________
Mark

1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30


Top
   
PostPosted: Tue Feb 06, 2018 3:39 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
Quote:
Soften with white spirit and then scrape off gently in my experience. You could also use some car tar remover like Autoglym but this is quite expensive so white spirit is probably better.
Thanks Mark, I'll give it a go


Top
   
PostPosted: Tue Feb 06, 2018 6:57 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1699
Location: Harrow Middlesex
Quote:
Quote:
Quote:
I am still trying to decide weather or not to strip off the ziebart from the engine bay.
I would, horrible stuff
I really hate it! How do you get it off? Scraper?
I think my cars was ziebarted i have small plugs fitted along sills but in the engine bay mines painted,not seen one like yours before

Dave


Top
   
PostPosted: Tue Feb 06, 2018 9:44 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7014
Location: Highley, Shropshire
It takes a while and it's hellishly messy, but petrol dissolves ziebart quite handily, I just soak it and then rub it off with a rag, then there's no scratching from the scraper. Patience is the key!

I'll check my shed, there may just be a wing in there you can use. I had 2 n/s ones and know I sold one but can't remember about the other!

Steve

Both the Carledo and the Dolomega are Ziebarted, including the full underbonnet area and the inside of the bonnet itself. But I believe you could, in the day, elect NOT to have the engine bay treated and save a few bob into the bargain. The place I REALLY hate getting it off from is the heater plenum cavity! Everywhere else is relatvely simple.

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Last edited by Carledo on Tue Feb 06, 2018 9:49 pm, edited 1 time in total.

Top
   
PostPosted: Tue Feb 06, 2018 9:47 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1909
Location: Hampshire
Quote:
It takes a while and it's hellishly messy, but petrol dissolves ziebart quite handily, I just soak it and then rub it off with a rag, then there's no scratching from the scraper. Patience is the key!

I'll check my shed, there may just be a wing in there you can use. I had 2 n/s ones and know I sold one but can't remember about the other!

Steve
Thanks Steve!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 328 posts ]  Go to page Previous 1 2 3 4 5 622 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited