The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Front brakes.
http://forum.triumphdolomite.co.uk/viewtopic.php?t=30788
Page 1 of 1

Author:  brianrheffron [ Sun Apr 03, 2016 2:57 pm ]
Post subject:  Front brakes.

Does the Works type front brake conversion, i.e. vented discs and
existing calipers spaced 10mm work with stock sprint alloys.

Author:  soe8m [ Sun Apr 03, 2016 6:35 pm ]
Post subject:  Re: Front brakes.

Yes.

Jeroen

Author:  Carledo [ Sun Apr 03, 2016 7:09 pm ]
Post subject:  Re: Front brakes.

You do need a replacement longer stub axle as well. I think Ken Clarke does these.

Steve

Author:  soe8m [ Sun Apr 03, 2016 7:30 pm ]
Post subject:  Re: Front brakes.

About 15 year ago i did fit these on a sprint of mine, genuine ST discs with spaced calipers but what i do remember is that it goes on a std hub with std stub axle. The only mod was fitting twin calipers.
Attachment:
bdbrake1.jpg
bdbrake1.jpg [ 67.25 KiB | Viewed 3000 times ]
Jeroen

Author:  brianrheffron [ Sun Apr 03, 2016 10:11 pm ]
Post subject:  Re: Front brakes.

Thanks for the information and picture.
Next request is what are the key dimensions of the ST discs.
By deduction I'm quessing 221 diameter, 20 mm thickness
and depth O/A 36 mm.

Author:  Dolly racer 33 [ Sat Apr 16, 2016 6:51 pm ]
Post subject:  Re: Front brakes.

These are not genuine ST discs Jeroen. The genuine ones were cast vented. Yours are cast solid then drilled.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/