The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
1500 tubular exhaust manifold http://forum.triumphdolomite.co.uk/viewtopic.php?t=31639 |
Page 1 of 1 |
Author: | marko [ Mon Sep 05, 2016 2:51 pm ] |
Post subject: | 1500 tubular exhaust manifold |
I'm to build a 1500 exhaust manifold and was wondering What size primaries you'd suggest. The engine has a pretty high lift cam, flowed head and is very shiny and pretty. I've made rover v8 manifolds before and used 1 1/2" pipe and have enough left, is it too big and therefore will slow down the gasses too much? I have all I need to build the manifold so would rather not have to spend out again but will if absolutely necessary. Input please. |
Author: | Toledo Man [ Tue Sep 06, 2016 7:37 am ] |
Post subject: | Re: 1500 tubular exhaust manifold |
The Spitfire 1500 tubular manifold would be a good place to start. As some of us already know, it can't be used on the Dolomite because it fouls the subframe. It would be useful a a guide for the primaries and would cut out some of the guesswork. |
Author: | marko [ Tue Sep 06, 2016 10:27 am ] |
Post subject: | Re: 1500 tubular exhaust manifold |
I've found out that with 1 1/2 primaries they'll need to be 11" long before a y connector. |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |