The Triumph Dolomite Club - Discussion Forum

Very late Rover 25s have a level warning switch built in too I have recently discovered

_________________
Vindicator Sprint, Honda Fireblade RRX 919cc, re-powered by AB Performance. Quick.

I have similar problems with my Robin Hood which is all Dolomite 1850 as I have had to modify the thermostat housing so it clears the bonnet but I cant see your photebucket mods either. Any pictures would be appreciated from you guys who modified theirs.

As you can see from the picture above the modified thermostat housing and the copper pipe with the "T" off to the expansion tank.

Holy thread rebirth Batman!!!
I will see if I can do anything with P/bucket and if not I will send them if I can find them

One thing is certain.....I am not paying them.

_________________
track action maniac.

The lunatic is out................heres Jonny!

Many thanks. Would appreciate it

I am unconvinced by your arrangement I'm afraid,
this is because any air bubbles from the engine won't escape readily to the expansion bottle.
(The original design had venting from both radiator and engine from the highest point....)

The later 1850s and Sprints used a different thermostat housing, one of these would solve your clearance problem
and allow venting of the cooling system as per the original design.
(The early and late thermostat housings are interchangeable.)




Ian.

Thanks Ian, I was afraid the set-up was wrong as I have tried almost everything else.

Can you point me in the direction of the newer type of cover as I am not sure what to look for.

Gary

I have found the type and Alun is selling me one.
Thanks anyway