The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Broken Delco Distributor cap spring - anyone got a spare? http://forum.triumphdolomite.co.uk/viewtopic.php?t=33384 |
Page 1 of 1 |
Author: | Bumpa [ Sun Dec 03, 2017 4:46 pm ] |
Post subject: | Broken Delco Distributor cap spring - anyone got a spare? |
The title says it all. One of the spring clips that hold the Delco dissy cap on my 1850HL has snapped. Can anyone help? I reaslly don't want to have to shell out for a recon dissy just for want of a spring clip. Thanks. |
Author: | GTS290N [ Sun Dec 03, 2017 7:50 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Try Robsport, give them a call? I might have one somewhere, but it will take time to find. |
Author: | MIG Wielder [ Sun Dec 03, 2017 10:12 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Hi Mike, If you want a brand new one the part number is 518437 from the early 1850 parts book p.20-11. Try the usual suppliers. If not I can do you a 2nd hand one when I work out how to remove it from the Delco body. It looks like there isn't a roll-pin retainer. HTH, Tony. |
Author: | Bumpa [ Mon Dec 04, 2017 12:35 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Tony, if you can get one off, I would be glad of it. Looking at my dissy, the springy clip can simply be forced over the pin - as you say the pin doesn't seem to be removable. Let me know if you can get one off and how much it will cost to post it to me and I will PM you with my address and we can arrange reimbursement. I put that part number into Rimmer's website and it came up with the correct item, but it was NLA. It suggested an alternative, and when I tried that it showed me a track rod end clamp from a Land Rover! Quite how that is an alternative to a distributor clip escapes me. Thanks for your help. Mike |
Author: | tony g [ Mon Dec 04, 2017 12:44 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
If all else fails try here http://www.distributordoctor.com/ Tony |
Author: | Bumpa [ Mon Dec 04, 2017 1:49 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Quote:
It's a good idea, and I have thought of the distributor doctor, but as far as I know he only deals with Lucas dissys. His web site doesn't mention Delco units at all.
|
Author: | dollyman [ Mon Dec 04, 2017 1:54 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Have you tried any of the vauxhall parts suppliers or forums? They have the same type of dizzy. Cheers, Tony. |
Author: | MIG Wielder [ Mon Dec 04, 2017 3:43 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Hi Mike, Not easy to get off are they . I made the mistake of trying to extract it downwards. Never mind its all done now. P.M. follows in a mo, Cheers for now, Tony. |
Author: | Bumpa [ Mon Dec 04, 2017 4:31 pm ] |
Post subject: | Re: Broken Delco Distributor cap spring - anyone got a spare? |
Thanks Tony, PM read and replied to. Mike |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |