The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Parts inventory - what are these? http://forum.triumphdolomite.co.uk/viewtopic.php?t=33757 |
Page 1 of 1 |
Author: | GTiJohn [ Sun Mar 18, 2018 2:36 pm ] |
Post subject: | Parts inventory - what are these? |
I've taken advantage of my family being out for the day and got the parts for my Sprint inside for a sort through I've now got them sorted into Body, Chassis, Electrical and Powertrain boxes but I've ended up with a small number of parts I can't easily identify. They aren't necessarily Dolly bits but the cam with car. Is anybody able to identify any of them please? |
Author: | tony g [ Sun Mar 18, 2018 3:12 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Pipe is the fuel pipe to the carbs- one feed from pump other 2 for carbs. The plate with 2 holes in it and i suspect a rubber pad is the heater hose outlet cover (screws to the bulkhead on the engine side. Tony |
Author: | GTiJohn [ Sun Mar 18, 2018 3:43 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote:
Pipe is the fuel pipe to the carbs- one feed from pump other 2 for carbs. The plate with 2 holes in it and i suspect a rubber pad is the heater hose outlet cover (screws to the bulkhead on the engine side.
Thanks Tony - I should say that the 3 items in the centre are pressed metal parts.
Tony |
Author: | GTS290N [ Sun Mar 18, 2018 4:56 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Here's photo's of the other black metal bit, before and after..... |
Author: | tinweevil [ Sun Mar 18, 2018 5:46 pm ] |
Post subject: | Re: Parts inventory - what are these? |
The wiring loom is off a manual non-overdrive gearbox. The shiny metal plate retains the right hand stalk to the steering column before fitting the left hand stalk. |
Author: | xvivalve [ Sun Mar 18, 2018 5:55 pm ] |
Post subject: | Re: Parts inventory - what are these? |
The unpainted bit is the clamp for the indicator stalk and the wiring is the gearbox supply (with the autobox inhibitor by-pass loop on the multi plug) |
Author: | GTiJohn [ Sun Mar 18, 2018 7:26 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote:
Ah ha, I've got the other metal part of that too - I'd mistaken it as a radiator support bracket!The retaining strap has long since gone so what's best to use in its place? Anyone need a non-overdrive harness? |
Author: | GTS290N [ Sun Mar 18, 2018 9:30 pm ] |
Post subject: | Re: Parts inventory - what are these? |
This stuff here is what I used after advice from this forum, it's perfect. I cut it to the correct width with a scalpel and metal straight edge: https://www.ebay.co.uk/itm/Rubber-Pirel ... 8WmxjfnCug I don't need that loom, but don't throw it. If no-one else needs it and you don't want to store it, I'll pay postage and keep it for posterity. edit: Just remembered, the bracket you thought was for the radiator used to have a piece of foam glued on to stop rattling from the washer bottle. I binned what was left of that and used some high density modern stuff, non absorbent. The colour doesn't matter since it can't be seen with the bottle on. edit edit: If the loom is going spare, Steve is more likely to find a useful home for it than me. |
Author: | Carledo [ Sun Mar 18, 2018 9:37 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote: I don't need that loom, but don't throw it. If no-one else needs it and you don't want to store it, I'll pay postage and keep it for posterity. Steve |
Author: | GTiJohn [ Mon Mar 19, 2018 8:02 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote: Quote: I don't need that loom, but don't throw it. If no-one else needs it and you don't want to store it, I'll pay postage and keep it for posterity. Steve Shall I bring it to the NEC this weekend? |
Author: | GTiJohn [ Mon Mar 19, 2018 8:04 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote:
This stuff here is what I used after advice from this forum, it's perfect. I cut it to the correct width with a scalpel and metal straight edge:
A metre - I only need a foot!
https://www.ebay.co.uk/itm/Rubber-Pirel ... 8WmxjfnCug |
Author: | Carledo [ Mon Mar 19, 2018 9:56 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote: Quote:
This stuff here is what I used after advice from this forum, it's perfect. I cut it to the correct width with a scalpel and metal straight edge:
A metre - I only need a foot!
https://www.ebay.co.uk/itm/Rubber-Pirel ... 8WmxjfnCug Steve |
Author: | Carledo [ Mon Mar 19, 2018 9:57 pm ] |
Post subject: | Re: Parts inventory - what are these? |
Quote: Quote: Quote: I don't need that loom, but don't throw it. If no-one else needs it and you don't want to store it, I'll pay postage and keep it for posterity. Steve Shall I bring it to the NEC this weekend? Steve |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |