The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Sprint Clutch Master Cylinder? http://forum.triumphdolomite.co.uk/viewtopic.php?t=33869 |
Page 1 of 1 |
Author: | DavePoth [ Sun Apr 22, 2018 8:15 pm ] |
Post subject: | Sprint Clutch Master Cylinder? |
Hello all! Quick question - what are people doing for Sprint clutch master cylinders these days? The one I have is going to take hours and hours of work to get operating and pretty again, and I'm quite lazy! I can't seem to work out what the correct one to buy. |
Author: | Galileo [ Sun Apr 22, 2018 9:09 pm ] |
Post subject: | Re: Sprint Clutch Master Cylinder? |
I used a new (circa £30) Wilwood 0.625" master cylinder, drilled and tapped the 3/8" outlet for the larger Dolomite 7/16" UNF pipe to maintain pedal feel. Eg. http://www.rallydesign.co.uk/product_in ... ts_id=4046 |
Author: | xvivalve [ Sun Apr 22, 2018 9:16 pm ] |
Post subject: | Re: Sprint Clutch Master Cylinder? |
Or send your's to me as an exchange with payment of £85 and get an original sleeved in stainless steel and resealed. Yes, I know more than twice the price, I wasn't going to get them done on that basis, but I was asked to so had a limited batch done and they've proven popular since as I've had to restock twice!. |
Author: | robertross [ Thu Apr 26, 2018 4:57 pm ] |
Post subject: | Re: Sprint Clutch Master Cylinder? |
A few years ago my clutch master cylinder died. My local garage confirmed that a master cylinder for a Land Rover Series 2/2A (part number 90569126) works perfectly, just needs an adapter to reduce (?) the thread size at the hydraulic outlet. If this is of interest, I can provide pictures of the original and replacement master cylinders. Regards, Robert Ross |
Author: | DavePoth [ Wed May 02, 2018 8:26 pm ] |
Post subject: | Re: Sprint Clutch Master Cylinder? |
Quote:
Or send your's to me as an exchange with payment of £85 and get an original sleeved in stainless steel and resealed.
Thanks Alun. I'll pop the one I have in the post tomorrow.
Yes, I know more than twice the price, I wasn't going to get them done on that basis, but I was asked to so had a limited batch done and they've proven popular since as I've had to restock twice!. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |