The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 2:40 pm

All times are UTC




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Quick radiator groaner
PostPosted: Tue May 08, 2018 11:09 pm 
Offline
TDC Member
User avatar

Joined: Mon Aug 10, 2015 8:20 pm
Posts: 1293
Location: Shetland / here & there
Is there a foolproof way to tell the difference between an 1850 radiator and a Sprint one, core depth?

Reason for asking is that I've put a more powerful electric fan on my Sprint over the weekend, and it still can't seem to bring the temperature down enough for my liking. After a bit of stop start traffic today both top and bottom rad hoses were equally hot. This is with the new fan creating gale force 8 under the bonnet and sucking in debris and small children through the front grill, so guess that's working. I'm squinting at the rad suspiciously, go check my 1850 one, back to the Sprint, buggered if I can tell the difference, either they are both Sprint or 1850 ones.

https://www.youtube.com/watch?v=iaJE-yyO4qo

_________________
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3


Top
   
PostPosted: Tue May 08, 2018 11:32 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Thu Oct 06, 2011 1:13 am
Posts: 3173
Location: The continent
A sprint one has more tubes in it but when it was recored once the identification will be harder. When you see an original new sprint radiator you cannot see through and has a fine maze. You wouldn't be able to put an electric fan on it the easy way by sticking pins trhough the core. When your's looks like a modern one looking at the core it's probably not a sprint one. When you have seen a few radiators you really think at looking at a genuine sprint one that they really did try to improve cooling. So unnatural fine maze and many tubes.

Hope that helps.

Jeroen

_________________
Classic Kabelboom Company. For all your wiring needs. http://www.classickabelboomcompany.com


Top
   
PostPosted: Wed May 09, 2018 8:16 am 
Offline
TDC Member
User avatar

Joined: Mon Aug 10, 2015 8:20 pm
Posts: 1293
Location: Shetland / here & there
Thanks Jeroen it does help, a quick check and one of those plastic fan pins goes straight through the same on the Sprint and 1850 radiator. Hmm...

_________________
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3


Top
   
PostPosted: Wed May 09, 2018 8:33 am 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Stick a Saab rad and Volvo header tank on it mate! Fit and forget!

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Wed May 09, 2018 10:38 am 
Offline
TDC Cheshire Area Organiser

Joined: Wed May 17, 2017 6:28 pm
Posts: 1405
Location: NANTWICH.
I was stuck in very slow moving traffic at the weekend :( As a quick fix to to bring the temp down.... I just popped the bonnet.... The hot air escaping through the gaps was incredible and the temperature returned to normal :D Not ideal, but how much hot weather do we get.
Steve's fix is the best though.

Tony

_________________
NOW A CLUB MEMBER 2017057 :bluewave:


Top
   
 Post subject: Hmm......
PostPosted: Wed May 09, 2018 4:25 pm 
Offline
TDC Member
User avatar

Joined: Thu Aug 09, 2007 1:22 pm
Posts: 6475
Location: Caithness, Scotland
If you only are to do one thing, fit a proper header tank (plumbed into the bottom hose).


Ian.

_________________
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.


Top
   
PostPosted: Wed May 09, 2018 7:41 pm 
Offline
TDC Member
User avatar

Joined: Mon Aug 10, 2015 8:20 pm
Posts: 1293
Location: Shetland / here & there
Have a VW expansion tank that I'm toying with using for just that Ian/Steve, but I'd like to get it working as intended and then improve rather than mask a fault, if you know what I mean?

Tony, definitely been thankful for the front hinged bonnet for just that reason, together with putting the heater on it's instant extra cooling!

Measured the cores, both the same thickness, 38mm, taken a picture of both and Jeroen's description of a true Sprint radiator do not match either. Starting to look like the previous owner has fitted an 1850 radiator, probably unwittingly so. The car has always ran a bit warm in the summer ever since I got it, okay when moving but there is next to no reserve if stopped in traffic as the fan always cuts straight in, fan also comes on when at motorway speeds when it's very hot outside in some plaintive attempt to cool things down.


Image
Image

Can you guess which is the 1850 radiator?!

_________________
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3


Top
   
PostPosted: Thu May 10, 2018 1:50 am 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Tony's quick fix of popping the bonnet in heavy traffic has been my go to solution for several years now, especially since they started putting ethanol in fuel which makes carbed cars super susceptible to rough running from fuel evaporation caused by high underbonnet temps. One of my customers has a Rover powered Stag which is especially prone to this, it's absolutely fine on the move, but 5 mins in stationary traffic has it coughing and spluttering like an asthmatic hippo, despite the electric fan. And my customer flatly refuses my permanent cure of some nice louvres in the bonnet!

One of the very first Sprints I worked on back in the early days had symptoms very similar to yours and I moved mountains trying to cure it, did all the usual stuff, changed the stat, flushed out the rad (twice, coolant was crystal clear) even changed the water pump. Eventually, in desperation, I changed out the rad and hey presto, the problem disappeared. It turned out that nearly a quarter of the tubes were blocked solid, despite there being no other evidence of muck or corrosion in the system.

My suggestion of the Saab rad is driven by cost considerations primarily, the Saab rad is about half the price of a recored Sprint stocker and 20% of the price of the flashy Alicool alternative. And everyone knows what a weak point the stock expansion tank is, fitting a proper header bottle is a no brainer (the Saab rad also necessitates one of these)

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Thu May 10, 2018 7:00 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Apr 02, 2008 7:07 pm
Posts: 77
Just lift the standard expansion tank up 1 inch ,easy fix.


Top
   
PostPosted: Thu May 10, 2018 8:34 am 
Offline
TDC West Mids Area Organiser
User avatar

Joined: Thu Sep 28, 2006 1:13 pm
Posts: 13316
Location: Over here...can't you see me?
The Sprint rad has only one extra fin per inch, 16 to 17, or 17 to 18, I forget which. It doesn’t sound much, but it is enough to make a difference visually.

Having run my daily driver back in the day with an 1850 rad from economic necessity, I can say that in s system with no other issues, it was adequate.


Top
   
 Post subject: Okay........
PostPosted: Thu May 10, 2018 8:43 am 
Offline
TDC Member
User avatar

Joined: Thu Aug 09, 2007 1:22 pm
Posts: 6475
Location: Caithness, Scotland
Quote:
Have a VW expansion tank that I'm toying with using for just that Ian/Steve, but I'd like to get it working as intended and then improve rather than mask a fault, if you know what I mean?
I tried the VW header tank,
it is not the best choice.
(I wrote an article for Dolly Mixture comparing VW, Rover and Volvo tanks.)

The shape means the "max" level only clears an 1850 engine,
a leak will mean the level will have dropped in the engine before the low level warning is triggered.




Ian.

_________________
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.


Top
   
PostPosted: Sun May 13, 2018 12:11 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Mon Dec 03, 2012 6:04 pm
Posts: 1549
Quote:
Stick a Saab rad and Volvo header tank on it mate! Fit and forget!

Steve
The one problem I found with the Saab rad is it barely fits, the standard rad must be tiny.


Top
   
PostPosted: Sun May 13, 2018 12:16 am 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Quote:
Quote:
Stick a Saab rad and Volvo header tank on it mate! Fit and forget!

Steve
The one problem I found with the Saab rad is it barely fits, the standard rad must be tiny.
The stock rad isn't very big, it comes of having a shell originally designed for a 1300 engine, though the GT6 is far worse off in this respect!
The Saab rad fits MUCH easier when shorn of some unnecessary plasic on the sides.

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC


Who is online

Users browsing this forum: AhrefsBot [Bot], djw113uk and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited