The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Wiring loom http://forum.triumphdolomite.co.uk/viewtopic.php?t=34044 |
Page 1 of 1 |
Author: | new to this [ Thu Jun 07, 2018 6:09 pm ] |
Post subject: | Wiring loom |
I've got a couple of wiring questions 1/ what colour are the wires that feed the horn 2/ how are the wires run that feed the starter motor,do they run along the anti role bar Thanks Dave |
Author: | Mad Mart [ Thu Jun 07, 2018 6:40 pm ] |
Post subject: | Re: Wiring loom |
On a Sprint, purple & black wires to the horn +ve, black earth. The wires for the starter are run inside the front rail of the subframe. There should be two holes in the subframe for plastic clips. |
Author: | new to this [ Fri Jun 08, 2018 7:27 pm ] |
Post subject: | Re: Wiring loom |
thanks Mart Found horn wide today,didn't see holes for the clips for starter motor Thanks Dave |
Author: | new to this [ Sat Jun 09, 2018 6:53 pm ] |
Post subject: | Re: Wiring loom |
Got another question,where does the live feed block mount,and can you get inside it to replace a cable ? Thanks Dave |
Author: | new to this [ Sun Jun 10, 2018 7:20 pm ] |
Post subject: | Re: Wiring loom |
does the live block/feed open up,if so how and where is it mounted to the car Thanks Dave |
Author: | Flyfisherman [ Sun Jun 10, 2018 8:48 pm ] |
Post subject: | Re: Wiring loom |
Quote:
thanks Mart
Found horn wide today,didn't see holes for the clips for starter motor Thanks Dave The holes are the back side of the front cross member on the subframe |
Author: | soe8m [ Sun Jun 10, 2018 10:53 pm ] |
Post subject: | Re: Wiring loom |
Quote:
does the live block/feed open up,if so how and where is it mounted to the car
It is attached to the starter cable around the alternator. It can open up but the wires have spade connectors so no need.Thanks Dave Jeroen |
Author: | new to this [ Mon Jun 11, 2018 7:01 pm ] |
Post subject: | Re: Wiring loom |
Quote: Quote:
thanks Mart
Found horn wide today,didn't see holes for the clips for starter motor Thanks Dave The holes are the back side of the front cross member on the subframe Dave |
Author: | new to this [ Mon Jun 11, 2018 7:10 pm ] |
Post subject: | Re: Wiring loom |
Quote: Quote:
does the live block/feed open up,if so how and where is it mounted to the car
It is attached to the starter cable around the alternator. It can open up but the wires have spade connectors so no need.Thanks Dave Jeroen I think the battery cable is short, that's why I wanted to get inside the feed block,where is the feed block mounted Thanks Dave |
Author: | soe8m [ Wed Jun 13, 2018 7:54 am ] |
Post subject: | Re: Wiring loom |
The feedblock is crimped to the startercable. When you have no starter cable you don't have a feedblock either. Jeroen. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |