The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Toledo grill screw grommets
http://forum.triumphdolomite.co.uk/viewtopic.php?t=34065
Page 1 of 1

Author:  RJF_70 [ Thu Jun 14, 2018 11:37 am ]
Post subject:  Toledo grill screw grommets

Missing 3 of the white round screw grommets for the screws to hold front grills in place on my Toledo, Are these still available or can anyone recommend a replacement? One side was held on just with zip ties.
Cheers Rich

Author:  SprintMWU773V [ Thu Jun 14, 2018 11:55 am ]
Post subject:  Re: Toledo grill screw grommets

Are these similar to the Dolomite setup? If they are then I used plastic number plate screws. Easy to obtain and don't rust. You don't have to use those u clips either.

Author:  Carledo [ Thu Jun 14, 2018 12:13 pm ]
Post subject:  Re: Toledo grill screw grommets

Bresco do the white plastic screw retainers for this, original part number is 621535, there are 10 in all.

I might be able to find a few decent used ones if you get stuck!

Steve

Author:  RJF_70 [ Thu Jun 14, 2018 12:40 pm ]
Post subject:  Re: Toledo grill screw grommets

Quote:
Bresco do the white plastic screw retainers for this, original part number is 621535, there are 10 in all.

I might be able to find a few decent used ones if you get stuck!

Steve
Where are the other 2 then Steve? Have the four one side and one the other hence why I thought I was missing 3, grills are in bad condition so have some replacements all intact, so guessing the 2 others are the long screw ways which are not on the set I've removed?
Rich

Author:  Carledo [ Thu Jun 14, 2018 12:56 pm ]
Post subject:  Re: Toledo grill screw grommets

Quote:
Quote:
Bresco do the white plastic screw retainers for this, original part number is 621535, there are 10 in all.

I might be able to find a few decent used ones if you get stuck!

Steve
Where are the other 2 then Steve? Have the four one side and one the other hence why I thought I was missing 3, grills are in bad condition so have some replacements all intact, so guessing the 2 others are the long screw ways which are not on the set I've removed?
Rich
Yes that's right, the odd 2 go in the long tubes at the outside ends of the grilles. Finding screws for these is a right pain, mostly they are missing, with the tubes broken off and often the bit of front inner panel they fit to is missing as well! Fortunately 4 a side is generally sufficient, so I regard the end ones as optional!

Steve

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/