The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Indicator light sealing/backing gasket/sponge http://forum.triumphdolomite.co.uk/viewtopic.php?t=34115 |
Page 1 of 1 |
Author: | Mahesh [ Mon Jun 25, 2018 4:19 pm ] | ||
Post subject: | Indicator light sealing/backing gasket/sponge | ||
Does anybody sell these ? The one that goes behind the lens is readily available. But not this one, which is located betwwen the body and fitting. Or should I just make my own ?
|
Author: | Mad Mart [ Mon Jun 25, 2018 6:12 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Go on, make them yourself Mahesh. You know you want to. |
Author: | new to this [ Mon Jun 25, 2018 6:46 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Mahesh Sorry to. Hijack but where do I get captive screw fixings for the sidelight /indicator Thanks Dave |
Author: | Mahesh [ Mon Jun 25, 2018 8:30 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote:
Mahesh
They are the originals, but I believe they are readily available, also swapped a 730d bootlid last year and found the same type in there.
Sorry to. Hijack but where did I get captive screw fixings for the sidelight /indicator Thanks Dave |
Author: | Carledo [ Mon Jun 25, 2018 9:46 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote:
Mahesh
Bresco, Fitchetts, Rimmers (roughly in that order) original Triumph part number is 90/79075.Sorry to. Hijack but where do I get captive screw fixings for the sidelight /indicator Thanks Dave Steve |
Author: | new to this [ Tue Jun 26, 2018 11:01 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote: Quote:
Mahesh
Bresco, Fitchetts, Rimmers (roughly in that order) original Triumph part number is 90/79075.Sorry to. Hijack but where do I get captive screw fixings for the sidelight /indicator Thanks Dave Steve Looked on Bresco but couldn't find the clips Thanks Dave |
Author: | oily66 [ Wed Jun 27, 2018 1:41 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Try this https://www.bresco.com/acatalog/Snap-In ... ubber.html in the middle near the bottom. |
Author: | Mahesh [ Wed Jun 27, 2018 2:56 pm ] | ||
Post subject: | Re: Indicator light sealing/backing gasket/sponge | ||
Not the best of jobs, but it will do for now,
|
Author: | new to this [ Wed Jun 27, 2018 9:09 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote:
thanks missed thatThanks Dave |
Author: | new to this [ Wed Jun 27, 2018 9:12 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote:
Not the best of jobs, but it will do for now,
MaheshJust looked on Rimmers site they sell the gasket, Dave |
Author: | Mahesh [ Wed Jun 27, 2018 9:39 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote: Quote:
Not the best of jobs, but it will do for now,
MaheshJust looked on Rimmers site they sell the gasket, Dave If it's a sponge one, my xps laminate flooring backing polystyrene gasket is probably superior, and watertight |
Author: | new to this [ Wed Jun 27, 2018 9:54 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Quote: Quote: Quote:
Not the best of jobs, but it will do for now,
MaheshJust looked on Rimmers site they sell the gasket, Dave If it's a sponge one, my xps laminate flooring backing polystyrene gasket is probably superior, and watertight I've got a spare light fitting with the rubber gasket,but the gasket has a split in it but apart from that will clean up to Dave |
Author: | Mahesh [ Wed Jun 27, 2018 10:09 pm ] |
Post subject: | Re: Indicator light sealing/backing gasket/sponge |
Mahesh I've got a spare light fitting with the rubber gasket,but the gasket has a split in it but apart from that will clean up to Dave [/quote] Many thanks Dave, but I have since found my earlier lights, i now need a rubber boot for the back. I know they are wrong for a later car, but do prefer the look. |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |