The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Rear hub puller
http://forum.triumphdolomite.co.uk/viewtopic.php?t=34189
Page 1 of 1

Author:  ABESDOLLY [ Fri Jul 20, 2018 10:34 pm ]
Post subject:  Rear hub puller

Hi,
Can anyone recommend the best place to get hold of a rear hub puller
Thanks
James

Author:  AlanH [ Sat Jul 21, 2018 8:37 am ]
Post subject:  Re: Rear hub puller

I bought one from Canley Classics.

Having said that I still could not get one of the hubs off with it so please let us know how you get on.

Also see my recent thread on oil seals.

Author:  Richard the old one [ Sat Jul 21, 2018 6:25 pm ]
Post subject:  Re: Rear hub puller

When I used a hub puller I found that it pulled one of the wheel studs a bit more through the hub and as a result the hub puller was not flat against the hub and so was not getting a square pull. Once I retightened the nuts I managed to get the hub off.

Author:  PaulB [ Thu Jul 26, 2018 5:33 pm ]
Post subject:  Re: Rear hub puller

For what car?

Author:  ABESDOLLY [ Thu Jul 26, 2018 6:04 pm ]
Post subject:  Re: Rear hub puller

Hi its a 1850hl, hopefully sorted now. Have ordered a puller and will try it when back off holidays.

Author:  ABESDOLLY [ Tue Jul 31, 2018 6:18 pm ]
Post subject:  Re: Rear hub puller

I manged to remove the hub from my spare axle, but sadly just deformed the end of the original half's half, which I didn't realise until I removed the puller.
Image

Author:  PaulB [ Wed Aug 01, 2018 7:52 pm ]
Post subject:  Re: Rear hub puller

Leave the hub nut on, it will support the thread on the end of the half shaft.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/