| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Spax Rear Shocks - bottom bush http://forum.triumphdolomite.co.uk/viewtopic.php?t=34317 |
Page 1 of 1 |
| Author: | yorkshire_spam [ Mon Sep 03, 2018 9:44 am ] |
| Post subject: | Spax Rear Shocks - bottom bush |
I tried fitting the Spax rear shocks to Binny last night. There's no way the bottom bush is going to go into the suspension arm. After much chin scratching and complaining I removed the shock and measured, the "new" bush in the Spax shock is over 3mm longer than the old ones I removed. Have I got the wrong bushes fitted? Has anyone else encountered this issue with Spax shocks before? Cheers, Sam |
|
| Author: | Flyfisherman [ Mon Sep 03, 2018 10:27 am ] |
| Post subject: | Re: Spax Rear Shocks - bottom bush |
Quote:
I tried fitting the Spax rear shocks to Binny last night. There's no way the bottom bush is going to go into the suspension arm. After much chin scratching and complaining I removed the shock and measured, the "new" bush in the Spax shock is over 3mm longer than the old ones I removed. Have I got the wrong bushes fitted? Has anyone else encountered this issue with Spax shocks before?
Hi SamCheers, Sam I had the same issue when I fitted my gaz coilovers - the gap in the rear trailing arm was not wide enough to allow the bottom on the shock to sit correctly. So I used a stretcher bolt and made the gap wider to allow the shock bushes to sit better in the trailing arm. Paul. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|