The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Nut 143804 - Toledo front suspension http://forum.triumphdolomite.co.uk/viewtopic.php?t=34394 |
Page 1 of 1 |
Author: | 2door-toledo [ Thu Sep 27, 2018 1:35 pm ] |
Post subject: | Nut 143804 - Toledo front suspension |
Hi, I'm replacing all of the fasteners on my Toledo's front suspension. I'm having trouble finding a source of nut 143804 (lower right in image). Does anyone know how it differs from 143802 and if I can use this instead? 143802 is offered by certain suppliers and I believe that is a nyloc 5/16 " UNF x 1/2 ". Thanks. |
Author: | Galileo [ Thu Sep 27, 2018 2:36 pm ] |
Post subject: | Re: Nut 143804 - Toledo front suspension |
Originally Cleveloc not Nyloc nuts to be pedantic! 3/8 UNF, have you tried looking around the Triumph range, same fasteners were used all over the place, this any good as a suggestion? https://www.revingtontr.com/product/ny6 ... 5-32-thick |
Author: | 2door-toledo [ Thu Sep 27, 2018 3:17 pm ] |
Post subject: | Re: Nut 143804 - Toledo front suspension |
Thanks for the reply - that's very helpful and helped me to understand that despite spending many hours looking at this page of the parts book I was misunderstanding the diagram entirely! I can now see that it goes onto the end of HB926 which as you say is 3/8" so your suggestion makes perfect sense. Thanks! |
Author: | TrustNo1 [ Thu Sep 27, 2018 8:08 pm ] |
Post subject: | Re: Nut 143804 - Toledo front suspension |
Quote:
Originally Cleveloc not Nyloc nuts [/url]
Is there any benefit to using Cleveloc over Nylock , I've been using Nylocks since I ran out of Cleveloc?
|
Author: | Galileo [ Thu Sep 27, 2018 8:35 pm ] |
Post subject: | Re: Nut 143804 - Toledo front suspension |
Only if there's any heat about, I've only ever used them on propshafts myself. |
Author: | TrustNo1 [ Fri Sep 28, 2018 8:22 pm ] |
Post subject: | Re: Nut 143804 - Toledo front suspension |
Quote:
Only if there's any heat about, I've only ever used them on propshafts myself.
Ah good point I'd not thought about heat cheers
|
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |