The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 1:14 pm

All times are UTC




Post new topic  Reply to topic  [ 41 posts ]  Go to page Previous 1 2 3 Next
Author Message
 Post subject:
PostPosted: Sun Dec 09, 2007 10:39 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Sun Oct 22, 2006 12:06 pm
Posts: 177
Location: Swansea
Oh my, what a lot of confusion i've caused :oops:

The part is 216901 as shown in the picture that Mart posted - NOT the long one that goes through the upper wishbone. To be honest, I was a little unsure what to call it, but the Haynes manual and Rimmers definately describe the dolomite as having double wishbone suspension - and in both Haynes and Rimmers terminology it is the bolt that connects the 'lower wishbone arm' (UKC1698) to the 'mounting bracket' (313290/1).

Thanks for the offer NO41Sprint, but i'd be happier knowing i've got the real thing (or nearest possible).

As I won't be able to get to Swansea Fasteners until Saturday, has anyone got an original going spare?

Thanks (and sorry for the confusion.)
Mark.


Top
   
PostPosted: Sun Dec 09, 2007 10:55 pm 
Online
TDC Member
User avatar

Joined: Thu Aug 09, 2007 1:22 pm
Posts: 6475
Location: Caithness, Scotland
Quote:
chances of finding an imperial bolt in a long length is very rare,unc is better than unf though.
The length of these track control arm bolts is not particularly long, so these shouldn't be a problem to obtain.

It is worth replacing these bolts, particularly on a car that has been unused and left outside for a long period, as the bolts may have rusted inside the bush. This occurred on the Sprint I rebuilt in the 90s. On one side the rusting had considerably reduced the bolt's diameter!
Quote:
I changed all my 5/16unf to m8 stainless steel on the steering joints.
Is it safe to use stainless steel bolts in a high load application such as the steering?

_________________
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.


Top
   
 Post subject: Car terminology.....
PostPosted: Sun Dec 09, 2007 11:12 pm 
Online
TDC Member
User avatar

Joined: Thu Aug 09, 2007 1:22 pm
Posts: 6475
Location: Caithness, Scotland
Quote:
Oh my, what a lot of confusion i've caused :oops:

The part is 216901 as shown in the picture that Mart posted - NOT the long one that goes through the upper wishbone. To be honest, I was a little unsure what to call it, but the Haynes manual and Rimmers definately describe the dolomite as having double wishbone suspension - and in both Haynes and Rimmers terminology it is the bolt that connects the 'lower wishbone arm' (UKC1698) to the 'mounting bracket' (313290/1).
You are right Mark, the terminology is confusing, especially as different names can be used for the same component!

In the case of Dolomites, the lower wishbone consists of two components - the track control arm UKC1698(which takes the lower ball joint) and tie bar 218482(bolted to TCA and subframe).
And as you said Rimmers add to the confusion, as their catalogue describes UKC1698 as "lower wishbone arm" and 218482 as "drag strut".

Hope this makes it a little clearer. Having encountered this confusion with terminology I try to use the component part numbers if I have a parts list I can consult.

_________________
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.


Top
   
 Post subject:
PostPosted: Sun Dec 09, 2007 11:28 pm 
Offline
TDC West Mids Area Organiser
User avatar

Joined: Thu Sep 28, 2006 1:13 pm
Posts: 13316
Location: Over here...can't you see me?
Now that I know which bolt Mark wants it is important to point out the non standard bolt head on this component which is machined slightly domed to prevent it causing damage to the steering rack gaitors!


Top
   
 Post subject:
PostPosted: Mon Dec 10, 2007 1:16 am 
Offline
TDC Member
User avatar

Joined: Tue Oct 03, 2006 5:48 pm
Posts: 8446
Location: Winscombe, North Somerset, England
Quote:
Have been stripping my front suspension today so that I can re-bush it - but the damn pivot bolt that connects the lower wishbone to the mounting bracket was stuck fast so I had to cut it off.

Trouble is that Rimmers list this part as 'no longer available' (part 216901)
At least some of us take note of what the post said. :wink: :lol:

_________________
Sprintless for the first time in 35+ years. :boggle2: ... Still Sprintless.

Engines, Gearboxes, Overdrives etc. rebuilt. PM me.


1997 TVR Chimaera 450


Image


Top
   
 Post subject:
PostPosted: Mon Dec 10, 2007 9:27 am 
Offline
TDC West Mids Area Organiser
User avatar

Joined: Thu Sep 28, 2006 1:13 pm
Posts: 13316
Location: Over here...can't you see me?
detail...detail! Cah.

What do you think you might have received from friends up north with that description?


Top
   
 Post subject: STAINLESS STEEL
PostPosted: Mon Dec 10, 2007 12:54 pm 
Hi
Stainless steel is just under grade 8.8 or in otherwords high tensile.

All unf and unc bolts are to the equivilant of 8.8.

Swansea fasteners buy from us................

cheers


Top
   
 Post subject: Re: STAINLESS STEEL
PostPosted: Mon Dec 10, 2007 6:03 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Sun Oct 22, 2006 12:06 pm
Posts: 177
Location: Swansea
Looks like xvivalve is going to try and help me out - Cheers.
Quote:
Swansea fasteners buy from us................
Showing my ignorance here NO41SPRINT, but who are you and what do you do? :?


Top
   
 Post subject: what do i do
PostPosted: Thu Dec 13, 2007 1:13 pm 
Hi Mark
I am the hand and power tool buyer for a national wholesaler of hand,power and fasteners.

We sell on average £20mill on fasteners and £10mill on tools a year.
This is why I am sad and know anorak stuff as its my day job .
I worked on the fastener side for 7 years.

http://www.harclo.com

cheers


Top
   
 Post subject:
PostPosted: Fri Dec 14, 2007 8:08 pm 
I pinched a £1.50 bolt from Swansea Fasteners the other day :twisted:


Well... I asked the price of such a size bolt,
"Yerp there £1.50 each"
*thinks to self, "oh I have £5, I will be able to afford 3 of them"
"I'll have 3 please"
Places a bag infront of me with 3 bolts in
"thatll be £5 odd"
:roll: WTF is the point of telling me the price with out VAT added to it when I have to pay VAT?! Why not just tell me the price thet're made for and then add whatever extras need to be added in to the price when I come to pay you!? Fu**ers!
Got an extra bolt when he forgot to take one back off me though....



So the morale of that short story is 'keep peoples minds occupied and you can rob them silly' :twisted:


Top
   
 Post subject:
PostPosted: Fri Dec 14, 2007 11:04 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Thu Nov 30, 2006 10:47 pm
Posts: 84
Don't forget that with most suspension set ups you'll need high shear bolts, and most of your normal fixing companies don't stock anything that would suit it would have to be special order items.

http://www.pilotfriend.com/experimental/build_8.htm

Heres a little link for aero standards

Neil


Top
   
PostPosted: Fri Aug 09, 2013 2:28 pm 
Hi All,

I have been searching for 2 new Pivot bolt 216901 with no sucess, I see from the thread below that this has come up before.

does anyone know where I can get two? I have tried the usual suspects but reached a dead end.

If anyone knows the length of the shoulder and the length of the tread, (I know it is 3/8 UNF, I can ask my friendly fastner company to make a batch in high tensile material.

Thanks


Top
   
PostPosted: Fri Aug 09, 2013 2:56 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Mon Jun 03, 2013 5:48 pm
Posts: 1635
Give Mick Dolphin a call, his website is showing stock at £2 each.

_________________
Some people are like Slinky's, they serve no real purpose in life but bring a smile to your face when you push them down the stairs.


Top
   
PostPosted: Fri Aug 09, 2013 3:30 pm 
Offline
TDC Staffs Area Organiser
User avatar

Joined: Wed Oct 18, 2006 2:08 pm
Posts: 5429
Location: The Old Asylum
I wouldn't put stainless anywhere near my suspension or steering, it's too brittle and if you use your car in the winter then salt will cause chloride stress cracking and potentially failure. The tensile strength is not too different but the shear strength is quite different to regular steel bolts used in suspension.

_________________
Mark

1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30


Top
   
PostPosted: Fri Aug 09, 2013 6:36 pm 
Thanks,

I tried Mick, he is going to double check but his copy says he is out of stock :(

also I agree Stainless is a no no.

I have a few contacts in fasteners who may be able to help in the UK if I knew the size and failing UK supply the company i work for is in the US and one of my colleagues is always willing to help.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 41 posts ]  Go to page Previous 1 2 3 Next

All times are UTC


Who is online

Users browsing this forum: Amazon [Bot], DotBot [Bot] and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited