The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Remanufacturing parts
http://forum.triumphdolomite.co.uk/viewtopic.php?t=32646
Page 1 of 1

Author:  uphill racer [ Tue May 23, 2017 5:46 pm ]
Post subject:  Remanufacturing parts

Apologies if this is in the wrong place, if so please just forgive my ignorance and stupidity and point me in the right direction!

I vaguely recall being told that TDC has arranged for the manufacture of some otherwise-irreplaceable panels (incl. e.g. GRP substitutes for steel wings), and I am sure I recall a discussion on the forum some weeks ago about the possibility of a limited run of a new exhaust manifold/downpipe for the 1300/1500 engines.

Am I right, and if so can anyone point me in the right direction for these please?

Many thanks.

Author:  Galileo [ Tue May 23, 2017 6:07 pm ]
Post subject:  Re: Remanufacturing parts

Have a look at the sticky posts in the "Dolomite-related [Start here!]" section entitled "TDC Spares Price List (UPDATED 4-3-17)" and "The panel range", the clue is in the subject! ;)

Author:  xvivalve [ Tue May 23, 2017 7:32 pm ]
Post subject:  Re: Remanufacturing parts

viewtopic.php?f=4&t=31388

viewtopic.php?f=4&t=31852&hilit=manifold

Author:  uphill racer [ Tue May 23, 2017 9:20 pm ]
Post subject:  Re: Remanufacturing parts

Thanks both :-)

Mental note: RTFM...

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/