The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Brake Pipe Flaring Tool http://forum.triumphdolomite.co.uk/viewtopic.php?t=33734 |
Page 1 of 1 |
Author: | SprintMWU773V [ Mon Mar 12, 2018 9:55 am ] |
Post subject: | Brake Pipe Flaring Tool |
I need to replace some brake lines on my van and think now would be a good time to invest in a brake pipe flaring tool to make SAE/DIN flares inc double flares. Perhaps I should have bought one when I did the Dolly but never mind! Potentially I might convert the van to dual MC so being able to make my own pipes would be good, plus it' a good excuse to buy more tools! I'm after a vice mounted one ideally rather than an on car type but of course new Sykes ones are stupid money and even used fetch a fair bit. Wondering if anyone could suggest any alternatives? I imagine there's a lot of rubbish out there made of Chinesium and brakes are of course critical. Oh and it must be capabale of flaring Kunifer as that's all I use. |
Author: | dollyman [ Mon Mar 12, 2018 10:13 am ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Hi Mark, I dont think i am to far away from you? "Woore" I have have a churchill one you can use if you want? And a bending tool... You can just pop along and have a play Cheers, Tony. |
Author: | tony g [ Mon Mar 12, 2018 1:07 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
https://www.ebay.co.uk/itm/BRAKE-PIPE-T ... Swx5RanZc2 Last you a lifetime with the right tools Tony |
Author: | yorkshire_spam [ Mon Mar 12, 2018 1:34 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
I have a couple, a massive vice mount sykes jobby that will flare large pipes, steel, whatever you throw at it, but you need to be built like Geoff Capes to use it. Most of the time I use one like this: Avoid the "horse shoe" ones like the plague, even the branded ones: I used to have a sykes like this: but the bridge piece would snap if you weren't careful with it, so I got rid. |
Author: | dollyman [ Mon Mar 12, 2018 4:34 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Quote:
https://www.ebay.co.uk/itm/BRAKE-PIPE-T ... Swx5RanZc2
This is a carbon copy of my churchhill one, and yes will last a lifetime Last you a lifetime with the right tools Tony Cheers, Tony. |
Author: | Mad Mart [ Mon Mar 12, 2018 6:32 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
I use the "horseshoe" type. They are fine if you only use copper brake pipe. Don't try using Kunifer though. |
Author: | new to this [ Mon Mar 12, 2018 8:56 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Quote:
https://www.ebay.co.uk/itm/BRAKE-PIPE-T ... Swx5RanZc2
I have the same type
Last you a lifetime with the right tools Tony |
Author: | new to this [ Mon Mar 12, 2018 8:58 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Quote:
I use the "horseshoe" type. They are fine if you only use copper brake pipe. Don't try using Kunifer though.
Is kunifer a harder material than copperDave |
Author: | SprintMWU773V [ Mon Mar 12, 2018 9:00 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Copper work hardens and goes brittle which is not ideal for brake pipes. Kunifer is not much more to buy. |
Author: | Pippin [ Mon Mar 12, 2018 9:53 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Quote: Dave [/quote] Yes. Kunifer is a copper, nickel and steel alloy. |
Author: | sprint95m [ Mon Mar 12, 2018 11:29 pm ] |
Post subject: | Yes |
I suggest, if you cannot find one locally go to Car Builder Solutions. Not only do they offer free carriage but, thanks to Larry, also give a discount of 10% to TDC members. Ian |
Author: | tony g [ Tue Mar 13, 2018 7:37 am ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Yes normally called cupronickel too so contains nickel with 10% copper. Darker in colour. Tony Quote: Quote:
I use the "horseshoe" type. They are fine if you only use copper brake pipe. Don't try using Kunifer though.
Is kunifer a harder material than copperDave |
Author: | tony g [ Tue Mar 13, 2018 7:37 am ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Sorry Pippin, I missed your reply Tony |
Author: | new to this [ Tue Mar 13, 2018 9:35 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
Thanks for the reply Dave |
Author: | Jod Clark [ Wed Mar 14, 2018 3:45 pm ] |
Post subject: | Re: Brake Pipe Flaring Tool |
I have one of these.... https://www.ebay.co.uk/itm/Laser-4048A- ... SwFnxaT0KP ...and it is the William Potatoes. Its quick, every flare I've ever done with it - even the first one ever - has been perfect, is unafraid of copper, kunifer or steel and has paid for itself many times over. |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |