The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
shot blasting barrel http://forum.triumphdolomite.co.uk/viewtopic.php?t=33891 |
Page 1 of 1 |
Author: | tamtrucks [ Thu Apr 26, 2018 4:57 pm ] | |||||
Post subject: | shot blasting barrel | |||||
hi all look at what i made.....and it works.....waterbutt 212 litre.....21" diameter by 39" long using a canister gun with 0.5mm to 1mm glass shot media,wheel came out alright,but this is working at 45psi just need to sort out the air line input hole thanks nic tt
|
Author: | TrustNo1 [ Thu Apr 26, 2018 7:36 pm ] |
Post subject: | Re: shot blasting barrel |
That's excellent, have you put lighting in it? |
Author: | tamtrucks [ Fri Apr 27, 2018 7:45 am ] | ||
Post subject: | Re: shot blasting barrel | ||
yeah got lighting in,,,12v 30led ultra bright,only cabled tied in until i find the correct overall light position
|
Author: | TrustNo1 [ Sat Apr 28, 2018 2:00 pm ] |
Post subject: | Re: shot blasting barrel |
That's great, I've been using a large wooden box.... goes looking for a plastic barrel |
Author: | tamtrucks [ Tue May 01, 2018 5:59 pm ] | ||
Post subject: | Re: shot blasting barrel | ||
blasted a pair of front shock mounts today,left is before-right is after
|
Author: | Jod Clark [ Fri May 04, 2018 6:58 am ] | ||
Post subject: | Re: shot blasting barrel | ||
Looks good, excellent work
|
Author: | tamtrucks [ Fri May 04, 2018 8:37 pm ] |
Post subject: | Re: shot blasting barrel |
thanks for the comments just finishing the barrel,removed everything and seal it up with silicone sealer and left alone for 2days to dry properley,before that i shot blast few more parts,,,,brake servo front and back piece,need to make a retain collar for the pedal side bellow to sit on,now got the seal to seal up the black inner sliding plastic bit that i had trouble in removing also blasted the tow bar i got(thank you) and sprayed it first in acid etch and left it to dry outside and then overnight indoors(keep it warm ) and bought some new bolts for it |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |