The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
What's what? 1300-1500 http://forum.triumphdolomite.co.uk/viewtopic.php?t=30838 |
Page 1 of 1 |
Author: | Tamworthbay [ Sun Apr 10, 2016 2:40 pm ] |
Post subject: | What's what? 1300-1500 |
I need to order some service bits for a 1300 dolomite, I,have been on Rimmer Bros website but the parts list only as 1300/1500 and I want to make sure the bits are for a rwd dolomite 1300 not a 1300 fwd. Parts are a slave cylinder repair kit 7/8 bore part no, 515297 Oil filter part no, GFE119 Can anyone confirm these are the correct bits of does anyone know how they differentiate between the two. Thanks. |
Author: | Carledo [ Sun Apr 10, 2016 3:33 pm ] |
Post subject: | Re: What's what? 1300-1500 |
The oil filter and slave cylinder repair kit are the same part on both 1300 and 1500 Dolomites. However there ARE some aftermarket slave cylinders out there that won't accept the OE seal kit and your car may have been retrofitted with one of these - so it's not always simple! Steve |
Author: | Tamworthbay [ Sun Apr 10, 2016 3:41 pm ] |
Post subject: | Re: What's what? 1300-1500 |
Quote: The oil filter and slave cylinder repair kit are the same part on both 1300 and 1500 Dolomites. However there ARE some aftermarket slave cylinders out there that won't accept the OE seal kit and your car may have been retrofitted with one of these - so it's not always simple!
Ah, that does complicate things as I have a receipt for a slave cylinder from a couple of years ago. Is there anyway to tell the originals from aftermarket?
Steve |
Author: | Carledo [ Sun Apr 10, 2016 8:48 pm ] |
Post subject: | Re: What's what? 1300-1500 |
Quote: Quote: The oil filter and slave cylinder repair kit are the same part on both 1300 and 1500 Dolomites. However there ARE some aftermarket slave cylinders out there that won't accept the OE seal kit and your car may have been retrofitted with one of these - so it's not always simple!
Ah, that does complicate things as I have a receipt for a slave cylinder from a couple of years ago. Is there anyway to tell the originals from aftermarket?Steve Steve |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |