door seals on sprint

Unanswered topics | Active topics

Board index » »

All times are UTC+01:00

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

10yearsafter

Post subject: door seals on sprint

PostPosted: Wed Jul 05, 2023 4:51 pm

Offline

TDC Member

Joined: Thu Jan 22, 2009 5:53 pm
Posts: 37

Anybody able to advise on Sprint door Aperture seals. The type supplied by some is not very good at going round the corners. unlike the OE .
Pt. No. not visible in my parts book. might have to cut and glue to stop the trim bulging and then the door won't close.
Is the original available?
Bob

Top

Profile

Reply with quote

Magenta Auto Sprint

Post subject: Re: door seals on sprint

PostPosted: Wed Jul 05, 2023 6:18 pm

Offline

TDC Member

Joined: Sun Jul 19, 2009 11:41 pm
Posts: 1031
Location: Silsoe, Beds

I bought my door seals for my sprint resto from Rimmer bros many years ago and I am very pleased with them. I made a cut guide from some aluminium U section which allowed me to cut the front rubbers at 45 degrees and the rear ones at 60 degrees. I used superglue 406 which is designed for glueing rubber.

I am about to order some more for my 1300.