The Triumph Dolomite Club - Discussion Forum

Hi All,great stand at the Practical classic show, nice to meet a few of you today, can anyone help with the following parts
1, Pair top ball Joints
2, rear gearbox seal
3, front diff seal
4, a pair of rear bumper number plate lights
5, pair of side light clusters (mine has the early ones)
6, set of standard shocks front & rear
7, steering rack boot
8, su service kits x 2
9, possibly a set of fuel lines
the maintenance bits i can so myself just take apart clean and service etc, hopefully some of you seasoned Guys may have some of these, i have gone to Rimmer Bros but the 1 item i bought did not fit so wont go there again

Which model do you have ?

Robsport or fitchetts stock dolomite parts.
Most triumph suppliers can do oil seals etc as they are common to other cars. As (I belive) are the dome bumper lights (Late 1500 spitfire,possibly stag)

_________________
Clive Senior
Brighton

Thanks for these contacts ill log and look

Hi its a 1500HL dolly with square \headlights got a pair of top ball joints coming need rear bumper number plate lights frog eye type

https://www.jamespaddock.co.uk/number-p ... 500ukc7274 just one of several suppliers. Google ukc7274 and it will turn up lots.

_________________
Clive Senior
Brighton

Hi - I’ve a pair of rear bumper lights

Pm me

Plenty of other stuff

_________________
VW Mk1 Golf GTi Campaign - Alpine White (A reg)
Dolomite Sprint - Magenta (M reg)
Vauxhall Omega MV6 - Champagne (S reg)
BMW Alpina B10 3.3 Touring (51 reg)

I've a pair of NOS rear shocks...

I make fuel hard lines from 8mm copper microbore central heating pipe. It's cheaper than buying it from the motor factors and plain copper is a lot easier to bend than Kunifer. and it lasts pretty much indefinitely. You don't need more than a £10 pipe bender to make and shape them with. Practice is your friend, make one bad or incorrect bend and you start again! Been there, done that and have a drawer full of Tee Shirts!

Alternatively, I have patterns and can make a set, but they'd be impossible to ship once bent to shape, you'd have to collect them from me here in South Shropshire!

Steve




Here's a set I made earlier!

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.