AARRGGHHHH........... After stripping the sprints' 'other' motor to almost nothing I headed for the distinctly dodgy looking water pump - and of course the stud sheared <!--EZCODE EMOTICON START >: --><img src=http://www.ezboard.com/intl/aenglish/im ... ns/mad.gif ALT=">:"><!--EZCODE EMOTICON END--> ...... Any advice on how deep this bolt goes so I don't go overboard when trying to drill it out? I may even just drop the bare block at a local machine shop but I guarantee they won't have seen a Dolly Sprint block for decades if ever! HELP!<!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/intl/aenglish/im ... /frown.gif ALT=":("><!--EZCODE EMOTICON END-->
<p></p><i></i>
Sheared Bolt - Water Pump
-
- Posts: 1673
- Joined: Sun Aug 17, 2003 6:45 pm
Re: Sheared Bolt - Water Pump
Where are you?
<p></p><i></i>
<p></p><i></i>
Re: Sheared Bolt - Water Pump
Not very deep 3/4 inch - remember this is a left hand thread. Drilling it out is normally quite easy, you can then use a small left hand stud extractor, I seem to remember the last one I did the sheer fact of drilling it out loosened the remains of the bolt and it could be undone with a screwdriver!<br>
<br>
Put a new bolt on there, with a penny washer under it - two levers under the washer and pop the pump out, then you can see if the cage remains in the block or not.<br>
<br>
Do the decent thing and swap it for a leccy pump, the club has all the engine bits and you can get the leccy pump from loads of places.
<p>Ben<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dollysprint.com">www.dollysprint.com</a><!--EZCODE LINK END--></p><i></i>
<br>
Put a new bolt on there, with a penny washer under it - two levers under the washer and pop the pump out, then you can see if the cage remains in the block or not.<br>
<br>
Do the decent thing and swap it for a leccy pump, the club has all the engine bits and you can get the leccy pump from loads of places.
<p>Ben<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dollysprint.com">www.dollysprint.com</a><!--EZCODE LINK END--></p><i></i>
Re: Sheared Bolt - Water Pump
thanks Ben, I'll be trying that, hopefully this evening. In response to carsreunited - I'm over in Brussels - from the photo on your post it seems you're the one way up north who had the bonnet bulge and extractors coming up over the top - I remember the car was for sale..... did it go or did you buy it?<br>
<br>
John
<p></p><i></i>
<br>
John
<p></p><i></i>
-
- Posts: 1673
- Joined: Sun Aug 17, 2003 6:45 pm
Re: Sheared Bolt - Water Pump
That's just the photo of an F3 Manifold at Gaydon Museum from the Mansell car.<br>
<br>
Mine is <br>
<br>
<!--EZCODE IMAGE START--><img src="http://img376.imageshack.us/img376/6366 ... <!--EZCODE IMAGE END--><br>
<br>
<p></p><i></i>
<br>
Mine is <br>
<br>
<!--EZCODE IMAGE START--><img src="http://img376.imageshack.us/img376/6366 ... <!--EZCODE IMAGE END--><br>
<br>
<p></p><i></i>
Re: Sheared Bolt - Water Pump
Giza go Mr!<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/intl/aenglish/im ... /happy.gif ALT=":D"><!--EZCODE EMOTICON END-->
<p></p><i></i>
<p></p><i></i>
Who is online
Users browsing this forum: No registered users and 1 guest