dolly exhausts
Re: Rimmers
Yeah but nobody has them despite advertising them in stock, I jsut spent several hours phoning around all the dealers this morning including all the exhaust manufacturers to find that mild steel centre boxes are not even listed any more and nobody has one.<br>
Rimmers and fitchetts may advertise them but they don't have any and won't be getting more.<br>
I need at least the centre box and rear section to be sure of getting rid of the holes although the majority of corrosion seems to be in the rear box.<br>
The car is only going to be with me for a year till I get one of my projects on the road, really don't want to spend serious money on it for someone elses benefit.<!--EZCODE EMOTICON START :rolleyes --><img src=http://www.ezboard.com/images/emoticons/eyes.gif ALT=":rolleyes"><!--EZCODE EMOTICON END-->
<p></p><i></i>
Rimmers and fitchetts may advertise them but they don't have any and won't be getting more.<br>
I need at least the centre box and rear section to be sure of getting rid of the holes although the majority of corrosion seems to be in the rear box.<br>
The car is only going to be with me for a year till I get one of my projects on the road, really don't want to spend serious money on it for someone elses benefit.<!--EZCODE EMOTICON START :rolleyes --><img src=http://www.ezboard.com/images/emoticons/eyes.gif ALT=":rolleyes"><!--EZCODE EMOTICON END-->
<p></p><i></i>
-
- Posts: 1311
- Joined: Sat Mar 08, 2003 8:28 pm
Patterns are kept....
and a company called Chester Exhausts will make you one up. I had this problem when early dolomite with overdrive systems vanished. They made me one and sent it for about 180 quid. Good quaity mild steel as its still on the car some 4 years on.<br>
<br>
Jonners
<p></p><i></i>
<br>
Jonners
<p></p><i></i>
Re: Patterns are kept....
If you mean CESUK I tried them, centre box unavailable and would't make one.<br>
I have phoned just about everyone I could find<!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/images/emoticons/frown.gif ALT=":("><!--EZCODE EMOTICON END-->
<p></p><i></i>
I have phoned just about everyone I could find<!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/images/emoticons/frown.gif ALT=":("><!--EZCODE EMOTICON END-->
<p></p><i></i>
Re: Patterns are kept....
There's <!--EZCODE LINK START--><a href="http://www.exhausts.uk.com/" target="top">Longlife Exhausts</a><!--EZCODE LINK END-->
<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>
<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>
Re: Patterns are kept....
bruce i have had made a few systems and part systems in the last year including a full exhaust for a 1968 triumph 1300tc for a clubtriumph member that no one else could get done. and just made a system for my 1300fwd.<br>
email me your address and i will see what i can do with getting one delivered, mail address on my ez profile.<br>
<br>
Justyn
<p></p><i></i>
email me your address and i will see what i can do with getting one delivered, mail address on my ez profile.<br>
<br>
Justyn
<p></p><i></i>
-
- Posts: 1311
- Joined: Sat Mar 08, 2003 8:28 pm
Some more thoughts...
The 1500 and 1300 dolly system is very similar to the older dolomite but has that kink in the pipe from fromt pipe to box. So just get an early non o/d dolly centre section and use you old pipe with a cut and join...<br>
The rear over axle bit mates up with either old or new 1850 systems fine...Ive mixed and matched before.<br>
<br>
Jonners
<p></p><i></i>
The rear over axle bit mates up with either old or new 1850 systems fine...Ive mixed and matched before.<br>
<br>
Jonners
<p></p><i></i>
Re: Some more thoughts...
Tried Wins? A mate got one for his Bond there recently.
<p>1978 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/704">Dolomite Sprint</a><!--EZCODE LINK END--> Blue, a bit tetley.<br>
1972 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/754">Spitfire IV</a><!--EZCODE LINK END--> No name, in bits.<br>
1968 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/705">GT6 II</a><!--EZCODE LINK END--> Little blue, nice!<br>
1973 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/755">Dolomite Sprint</a><!--EZCODE LINK END--> VA41, seriously tetley.<br>
1980 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/864">Dolomite 1500HL</a><!--EZCODE LINK END--> Orange, current daily drive.</p><i></i>
<p>1978 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/704">Dolomite Sprint</a><!--EZCODE LINK END--> Blue, a bit tetley.<br>
1972 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/754">Spitfire IV</a><!--EZCODE LINK END--> No name, in bits.<br>
1968 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/705">GT6 II</a><!--EZCODE LINK END--> Little blue, nice!<br>
1973 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/755">Dolomite Sprint</a><!--EZCODE LINK END--> VA41, seriously tetley.<br>
1980 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/864">Dolomite 1500HL</a><!--EZCODE LINK END--> Orange, current daily drive.</p><i></i>
Re: Some more thoughts...
hmmm.<br>
<br>
custom chrome, nuneaton tel 02476 errrrr forgot the rest, whack it in google or see a previous thread on zorsts. they'll do owt you want, but tend to favor stainless and shiny chrome, although im sure they'll do quite competitive mild steel...<br>
<br>
will make up whatever you like, to your (accurate) measurements, or take the car there and they'll do it 4 u<br>
<br>
<!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END-->
<p>project orange - slow progress<br>
project black - coming on, could be sold...<br>
project white - pimp my tolly, next year!</p><i></i>
<br>
custom chrome, nuneaton tel 02476 errrrr forgot the rest, whack it in google or see a previous thread on zorsts. they'll do owt you want, but tend to favor stainless and shiny chrome, although im sure they'll do quite competitive mild steel...<br>
<br>
will make up whatever you like, to your (accurate) measurements, or take the car there and they'll do it 4 u<br>
<br>
<!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END-->
<p>project orange - slow progress<br>
project black - coming on, could be sold...<br>
project white - pimp my tolly, next year!</p><i></i>
Re: Some more thoughts...
i havn't forgotten, i ran out of days this week , will try early next.<br>
<br>
Justyn
<p></p><i></i>
<br>
Justyn
<p></p><i></i>
done and dusted
Managed to get a rear section from CESUK and pieced in a bit between the old centre and new rear box. Sorted for around 45 quid including the clamps.<br>
<br>
<p></p><i></i>
<br>
<p></p><i></i>
Re: done and dusted
not a bad price.<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <br>
give me another shout if needed.<br>
<br>
Justyn
<p></p><i></i>
give me another shout if needed.<br>
<br>
Justyn
<p></p><i></i>
Who is online
Users browsing this forum: No registered users and 1 guest