what is

[davepoth]

again with the volvos.<br>
<br>
A Kia Rio has a 60-2 timing wheel...<!--EZCODE EMOTICON START :x --><img src=http://www.ezboard.com/intl/aenglish/im ... s/sick.gif ALT=":x"><!--EZCODE EMOTICON END-->

<p></p><i></i>

[bodgerben]

Afraid not, the manufacturer has been mentioned, but it's not Volvo, or Kia for that matter.<br>
<br>
It's a very well known manufacturer, and the car it comes off is just a more modern Sprint.<br>
<br>
One of the eggsperts I asked about the the dampers said that manufacturer did a 32/1 damper which would be good if I went for an ECU, hmmm dunno about that, I've never heard of a 32/1 wheel before (unless someone attacked it with a hacksaw).<br>
<br>
I'm inclined to go for a plain damper and add a 36/1 wheel to that, so I can use Ford EDIS, but then again I may try both, as they just bolt on, anyway I'll let you all know what and where when the bits arrive.<br>
<br>


<p>Ben<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dollysprint.com">www.dollysprint.com</a><!--EZCODE LINK END--></p><i></i>

[KLJ895W]

£312.97 for the damper<br>
£139.05 for th hub<br>
£85.00 for the pulley<br>
<br>
£537.02!!!!!!!!!!!!!!!!!!!!!!!!!!<br>
<br>
<!--EZCODE LINK START--><a href="http://www.bighealey.co.uk/section.php?id=21&page=2" target="top">Here</a><!--EZCODE LINK END--><br>
<br>
David

<p><!--EZCODE LINK START--><a href="http://www.triumphowners.com/570" target="top">1980 Sprint</a><!--EZCODE LINK END--><br>
<!--EZCODE LINK START--><a href="http://www.triumphowners.com/569" target="top">1980 1850HL with Sprint gearbox, propshaft and axle</a><!--EZCODE LINK END--><br>
1972 VW Camper Van</p><i></i>