The Triumph Dolomite Club - EzBoard Archive

OK.<br>
What is the best or recommended ball joint separator on the market to to the upper and lower ball joins on a Sprint. <!--EZCODE EMOTICON START :rolleyes --><img src=http://www.ezboard.com/intl/aenglish/im ... s/eyes.gif ALT=":rolleyes"><!--EZCODE EMOTICON END--> <br>
<br>
<!--EZCODE LINK START--><a href="http://triumphdolomitesprin.mysite.freeserve.com/" target="top">triumphdolomitesprin.mysite.freeserve.com/</a><!--EZCODE LINK END--><br>
<br>
<!--EZCODE IMAGE START--><img src="http://mysite.freeserve.com/triumphdolo ... cture6.gif" style="border:0;"/><!--EZCODE IMAGE END-->

<p>Magenta Man</p><i></i>

Simon.<br>
My choice would be a Snap On ball joint Seperater,<br>
It's adjustable for large and smaller joint's.<br>
Never failed me yet.<br>
<br>
I'll try and find a Part number so you can see what it look's like on the Snap On Site

<p></p><i></i>

Not found on the Snap On site,<br>
But did find one on http://www.Machinemart.co.uk<br>
Part number is CHT222 under a tenner.

<p></p><i></i>

you can get a cheapo one that you use in conjunction with a hammer.ok if replacing with new joints.no good if re-using as this sort of splitter always rips grease seals.

<p></p><i></i>

Thanks guys.<br>
<br>
<!--EZCODE IMAGE START--><img src="http://mysite.freeserve.com/triumphdolo ... cture2.gif" style="border:0;"/><!--EZCODE IMAGE END-->

<p>Magenta Man</p><i></i>