The Triumph Dolomite Club - EzBoard Archive

I have 3 gaskets that I ordered from Rimmers, forgetting that if you have a blanking plate these aren't any good. If anyone can use them I'll post them to you.<br>
<br>
Part Number 138791 <br>
Description PETROL PUMP GASKET for Sprint/1850

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

Why are they no good with a blanking plate? Surely it's still sealing the same place using the same bolt holes?<br>
<br>
David

<p></p><i></i>

The blanking plates are smaller, height wise, than the pump face. Therefore the cutout in the original gaskets protrudes above the blanking plate. It's easy to make your own & cheaper.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>