Page 1 of 1
sprint servo
Posted: Sun Apr 04, 2004 5:28 pm
by simonhorton
Does anyone know what the difference is between a single and a dual line brake servo?<br>
Regards Simon
<p></p><i></i>
Re: sprint servo
Posted: Sun Apr 04, 2004 6:04 pm
by MaddMart
Didn't know there was a difference !!
<p><!--EZCODE LINK START--><a href="
http://www.aqpd91.dsl.pipex.com/" target="top">Mad Mart's Website</a><!--EZCODE LINK END--></p><i></i>
Servo
Posted: Sun Apr 04, 2004 8:35 pm
by alun n
Up to VA26900 the dual used the same as the single (UKC 1253) after that it was changed to AEU1304. A similar change occurred at the same time to the 1850. <br>
<br>
I imagine they are interchangeable, possibly slightly uprated to push the dual circuit harder? <br>
<br>
Externally, I don't believe you can tell them apart.
<p></p><i></i>
Boost
Posted: Sun Apr 04, 2004 8:37 pm
by Malc
I believe that the 'boost' ratio differs but I don't have any of the specifications. God only knows how you identify the units from each other, it is all a bit 'balck box' technology <!--EZCODE EMOTICON START >D --><img src=
http://www.ezboard.com/intl/aenglish/im ... s/grin.gif ALT=" >D"><!--EZCODE EMOTICON END-->
<p></p><i></i>
