The Triumph Dolomite Club - EzBoard Archive

The gent that gave me the Rotoflex also gave me a brand new Brake Master Cylinder.<br>
<br>
It has the words "Girling .75A" cast into it on one side, whilst on the other side it reads "Girling . 75".<br>
<br>
On the one on my 1850 it reads (through the white powder) "75 Girling" on both sides ( The dot may be there and I cannot see it).<br>
<br>
Assuming this was orignially bought either for his 1500 FWD or his later Toledo and put away unused, will it be of use for me to keep for my 1850?<br>
<br>
It's dimensions look the same and there is a single outlet on both in the same place.

<p></p><i></i>

Alan, This should be fine for your 1850, all dolomite Single Line B'Masters are the same, Girling .75 bore.

<p></p><i></i>

Thanks Malc<br>
<br>
<br>
It can now go into storage (again) for future use.<br>
<br>
Thanks again.<br>
<br>
ALAN

<p></p><i></i>