The Triumph Dolomite Club - EzBoard Archive

Does anybody know where I can source some rubber grommets in good condition for my floor pans (the front footwells in particular)? Mine have seen much better days, which means that on occasion I do get rather a wet bottom<!--EZCODE EMOTICON START : --><img src=http://www.ezboard.com/images/emoticons/ohwell.gif ALT=":"><!--EZCODE EMOTICON END--> This will, in all probability, eventually lead to saggy bits and holes where I don't want them<!--EZCODE EMOTICON START :eek --><img src=http://www.ezboard.com/images/emoticons/eek.gif ALT=":eek"><!--EZCODE EMOTICON END-->

<p>Debs<br>
Custodian of "Molly the Dolly"<br>
</p><i></i>

I personally have removed mine as they fell to bits. Why block up a perfectly good drain hole if it gets wet in there? If you still want grommets many a motor factor sells them at a very reasonable price. Just measure the appropriate hole first.

<p></p><i></i>

I've often wondered about taking them out myself, as the water seems to find its way in, but not out again. <!--EZCODE EMOTICON START : --><img src=http://www.ezboard.com/images/emoticons/ohwell.gif ALT=":"><!--EZCODE EMOTICON END--> The same goes for the grommets in the cills! Leave in or take out is the quandry. What does everyone else do?

<p>Debs<br>
Custodian of "Molly the Dolly"<br>
</p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... club>Dolly Bird</A> at: 27/6/06 3:19 pm<br></i>

find the source of the water getting in<!--EZCODE EMOTICON START :p --><img src=http://www.ezboard.com/images/emoticons/tongue.gif ALT=":p"><!--EZCODE EMOTICON END--> <br>
in the meantime leave the grommets out, my local man does the grommets so do halfords ect.<br>
<br>
Justyn

<p></p><i></i>

the size of the grommets are on them that is if they are oem

<p></p><i></i>

We (as in the royal work we) sell assortment packs of rubber grommets, but the biggest ones are 25mm, and I'm sure there are bigger ones on a dolly, but if thats any use let me know, wholesale price stylee!<br>
<br>
<!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END-->

<p>project orange - slow progress<br>
project black - coming on, could be sold...<br>
project white - pimp my tolly, next year!</p><i></i>

there is a place in empress road that sell grommets , bolts ect so if i stop running around like a headless chicken trying to make huwie roadworthy(and causing near death everytime i go near something electric/ mechanical) i will try to pop down there.<br>
<br>
Justyn

<p></p><i></i>