Page 1 of 1
rev counter wiring connections
Posted: Sun Mar 14, 2004 6:37 pm
by ianluxford
hi i have a dolomite rev counter that i am fitting to my robin hood kit car. on the back of it theres 2 conectors one bullet one spade i take it one is off the -ve the other will be a live (does it have to be a voltage regulator?) can anyone tell me what one is what? <br>
thanks for you help<br>
ian
<p></p><i>Edited by: <A HREF=
http://p206.ezboard.com/bthetriumphdolo ... omiteuk</A> at: 19/10/06 12:45 pm<br></i>
Re: rev counter
Posted: Sun Mar 14, 2004 11:25 pm
by Jod Clark
Tab on body of rev counter: earth<br>
<br>
(insulated) spade connector on back of instrument, +12v (unregulated or regulated, don't think it matters)<br>
<br>
Bullet connector: trigger from points side of coil.<br>
<br>
Jod
<p><!--EZCODE IMAGE START--><img src="
http://www.towingandleisure.co.uk/images/bash.gif" style="border:0;"/><!--EZCODE IMAGE END--></p><i></i>
Re: rev counter
Posted: Sun Mar 14, 2004 11:31 pm
by SprintV8
Bullit connecter Pulse lead from igintion coil ve-<br>
Spade terminal Fused Ignition switch feed<br>
<br>
There's also a spade teminal on the back of the Revcounter housing this go's to earth.<br>
<p></p><i></i>
Connected
Posted: Mon Mar 15, 2004 10:47 pm
by Malc
Well done chaps, now I can test my RVC2811/00AF that won't be for a Sprint cos it is 8 Cyl......too busy looking at the part number to see the obvious <!--EZCODE EMOTICON START :o --><img src=
http://www.ezboard.com/intl/aenglish/im ... rassed.gif ALT=":o"><!--EZCODE EMOTICON END-->
<p></p><i></i>
Sorry Malc....
Posted: Mon Mar 15, 2004 10:51 pm
by alun n
....knew there was something I had to do for you; been too busy sipping champers on £7m yacht in Cannes<!--EZCODE EMOTICON START :hat --><img src=
http://www.ezboard.com/intl/aenglish/im ... s/pimp.gif ALT=":hat"><!--EZCODE EMOTICON END-->
<p></p><i></i>
