Page 1 of 1
Cam identification
Posted: Thu Jun 22, 2006 6:52 pm
by Leeroy ORG 27R
I have a head with a fast road cam insitu (we were told), can anyone tell me where to look on the cam, to find out which cam it is. I've heard a few of you discussing different cams. Just want to identify mine! <br>
<br>
So far all i can see is Stan Part, i think is says 1472, with KC16V7 on the end. Is this a fast road cam?
<p></p><i>Edited by: <A HREF=
http://p206.ezboard.com/bthetriumphdolo ... 27r>Leeroy ORG 27R</A> at: 22/6/06 7:07 pm<br></i>
Re: Cam identification
Posted: Thu Jun 22, 2006 7:36 pm
by dollyboy
is it a sprint?<br>
<br>
if so go here:<br>
<br>
<!--EZCODE AUTOLINK START--><a href="
http://www.triumphowners.com/resources. ... <!--EZCODE AUTOLINK END--><br>
<br>
<!--EZCODE EMOTICON START ;) --><img src=
http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END-->
<p>project orange - slow progress<br>
project black - coming on, could be sold...<br>
project white - pimp my tolly, next year!</p><i></i>
Re: Cam identification
Posted: Thu Jun 22, 2006 7:39 pm
by MaddMart
It's the number on the end (KC16V7). KC is Kent Cams. 16V for Sprint, but I can't remember what the 7 is. Probably a reprofiled cam as you have the original "Stan Part" on there.<br>
<br>
I've looked on the Kent Cams website but can't trace the no.
<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="
http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i>Edited by: <A HREF=
http://p206.ezboard.com/bthetriumphdolo ... addMart</A> at: 22/6/06 10:37 pm<br></i>
Re: Cam identification
Posted: Thu Jun 22, 2006 10:31 pm
by Carsreunited
Could it be KC16V145 which is the TT10106.<br>
<br>
<p></p><i></i>
Re: Cam identification
Posted: Fri Jun 23, 2006 6:38 am
by Leeroy ORG 27R
Looks like there could be a T in before the 7, KC16VT7, and has 0802 underneath (could this be month and year it was reground?) Also behind the KC number, there is ZFW5
<p></p><i></i>
measure....
Posted: Fri Jun 23, 2006 10:11 am
by Jon Tilson
the valve clearances...<br>
The std cam is 16 thou ish.<br>
Interesting ones are 8 thou inlet 9 exhaust<br>
Jonners
<p></p><i></i>
Re: measure....
Posted: Fri Jun 23, 2006 4:20 pm
by Leeroy ORG 27R
Spoke to a chap at Kent Cams, this reference number is apparently a triumph tune cam.
<p></p><i></i>
Re: measure....
Posted: Fri Jun 23, 2006 4:31 pm
by MaddMart
T7 = TT10104 Road Cam<br>
<br>
Clearance = .009" - .010"<br>
Installation figure = 102
<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="
http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>
Re: measure....
Posted: Fri Jun 23, 2006 4:34 pm
by Leeroy ORG 27R
Martin, does this give a figure for bhp, Lee<br>
<br>
sorry, found it, 152. is it worth the trouble to swap them over????
<p></p><i>Edited by: <A HREF=
http://p206.ezboard.com/bthetriumphdolo ... 27r>Leeroy ORG 27R</A> at: 23/6/06 4:37 pm<br></i>
