Page 1 of 1
Starter Studs
Posted: Mon Sep 18, 2006 9:58 am
by Mike Groom
Can anyone tell me what the thread size is on the starter studs on an 81 Sprint please?<br>
Anyone used helicoiling to repair one?
<p></p><i></i>
Re: Starter Studs
Posted: Mon Sep 18, 2006 10:04 am
by MaddMart
3/8" UNF (9/16" AF).
<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="
http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>
Studs?
Posted: Mon Sep 18, 2006 10:16 am
by Jon Tilson
Mine are all done with 3 bolts. (9/16 head and I'd go with marts thread size)<br>
Jonners
<p></p><i></i>
Re: Studs?
Posted: Mon Sep 18, 2006 7:44 pm
by Toledo Man
I'll third that. I was helping somebody install a Sprint engine in a TR7 the day before the TDCIR and I worked on the starter motor so I know it is 9/16" AF!<br>
<br>
Mart, it was good to put a face to the name at the TDCIR.
<p>Toledo Man<br>
<br>
1974 Toledo 2-door (currently a spares car for Snowdrop)<br>
1973 1500fwd (Baby Blue slowly being recommissioned)<br>
1971 1500fwd (spares car for Baby Blue & future donor for the "Stretch 1500" project)<br>
1983 Acclaim HL (Becky, my daily driver)<br>
1977 Dolomite 1300 (Snowdrop, just failed the MoT - AAARRGGHHHH!!!!!)</p><i></i>