The Triumph Dolomite Club - Discussion Forum

Hi here's the link I think your talking about, I did it a few years ago. Can take some photos under the car if you like

https://forum.triumphdolomite.co.uk/vie ... ft#p218211

Regards
James

Hi I replaced mine with a transit one a few years ago. See topic below
https://forum.triumphdolomite.co.uk/vie ... ft#p218211

Think I've discover why my plugs failed. They appear to be getting covered in oil

No bosch plugs

Hi guys thanks for your help. So I decided to try changing the plugs and it started straight away without hesitation. Can't really undesand how all 4 plugs can fail, but look fine when taken out and put up against the block?

I took the spark plugs out and held them against the block

Hi All
Last week I went out to my garage for a trip out in the dolly, but sadly she wouldn't start. She was running fine when I drove her in there a few days before.
I have checked and I'm getting a good spark, Ive also check that the fuel pump is working fine and the float chambers are full. But ...

I manged to remove the hub from my spare axle, but sadly just deformed the end of the original half's half, which I didn't realise until I removed the puller.

Hi its a 1850hl, hopefully sorted now. Have ordered a puller and will try it when back off holidays.

Hi,
Can anyone recommend the best place to get hold of a rear hub puller
Thanks
James

Ok, thanks for info. Will order some superflex bushes

Hi does anyone have experience of Flo-flex bushes? Are they any good and if not what brand should I look for?
Thanks in advance
James

First day I have had off work in months and apparently a dolomite is parked outside and its not mine. Typical I miss it.go sent a photo though by a work mate.
Is this anyone on here looks very nice. Ron630m

Thanks for the quick replies , I will see if I can clean the pump. I think the runner is bent but I have a spare so will replace it when I get the car back at the weekend

Hi all
My 1850hl had its mot today and failed on a couple of things.
The drivers seat runner not running properly which is annoying as it's been like this for the last six mot's And the screen wash pump not providing enough water.
Does anyone know what the requirement for this is?
Thanks james