The Triumph Dolomite Club - Discussion Forum

There are two type of choke cables one has a solid wire and the other has a stranded wire and I believe they have a different arrangements to lock the choke out when it is required. The solid wire type just relies on friction between the wire and the outer case to keep it out and the stranded wire ...

I wish I could give a definitive answer but I can’t. The springs are shown in the Official Triumph Dolomite range 1971 onwards parts catalogue but I can’t find any info about fitting them in the official workshop manual.

Similarly they are shown in an exploded view of a gearbox in the 1500 Dolomite ...

I am not a track day man but if sufficient people want it do go ahead with it.

I went last year and plan to go again this year. I hope a few more TDC members will also come along this year,

I assume Rimmers are still producing and sending out Dolomite and Sprint parts and accessories catalogues if you request one. I have an edition 2.2 and on page22 it list manual gearbox components for the various cars. As previously stated the late 1300 and 1500 gearboxes have lip seals which require ...

Have you also checked the fuse electrically. You need to do it with a meter as I had one that looked to be ok but it was no longer passing any current.
I will also include https://i.postimg.cc/SjVwwRK8/EPSON050.jpg the 1550 dolomite ignition circuit diagram which I included in Dolly Mixtures no so ...

The loss of the voltmeter read may just be that the earth connection to the voltmeter is not very good. I suggest you check that the actual voltmeter connections are making a good contact. I did have a problem and It took me quite a time to find it was actual the voltmeter negative connection. Check ...

Wonky wobbly jets are a common problem. I have just used some resin to stop them moving about.

Hi Jod.

I found your article interesting to read and I can understand that you have found that it works however after checking my spare slave cylinder a part number GSY105 it does have different size treads so I would not be able to install it as you suggest.

I believe that a GSY103 is notched on ...

I was a bit quick with my initial response in that I was only considering the internals which you had checked out.
I think you were right to replace the front and rear seals but I would also replace the speedo drive seal part NKC105 as I changed a rear seal on one car thinking it was that which was ...

Purchase a modern 12v pump such as part wp12 from www.vechicle products.co.uk. as they seem to last a lot better. I have fitted one on the top of the washer reservoir as the wires and pipes were long enough to fit it there and it is so easy to get at. Use the wife's hair drier to warm up the plastic ...

The problem is you can't be certain that any new parts will be as good as the ones fitted.

Ziebart and other rust protection treatments.

When I purchased my first 1500HL Dolomite in May 1977 I had it Ziebarted and when I checked it over I did find a couple of areas where I considered the coverage to be either lacking or poor so I took it back and these areas were treated to my ...

I went up to Worksop on the Wednesday before the event and did not come home until Tuesday. There were plenty of places to visit in the area. It was made more enjoyable as we were able to go out for an evening meal after the event with Mike Tailor and his wife. I am always disappointed that more ...

Can you please provide the part number for the double seal.