Howdy Y'all
Well now that JDX has passed MOT thought i would share with you some of the work progress been done by Hubby and snapped by himself whilst at each stage.
BEWARE - there's quite a few pictures here of the work completed so allow yourself some time!!!!
Well work done has included -
cut off outer sills,
cut out any trace of rust within the surrounding areas back to fresh clean metal,
made new jacking points,
renew sill centre section as and where necessary,
made new sill end closing panels front and back!
new lower forward edge rear arch sections,
new rear lower front wing sections,
new front lower front wing sections
etc etc........
All flush welded!!
Any loose dry underseal removed! And Re-sealed!
All box sections, chassis legs, doors, etc etc...... Waxoyl injected
PHEW!!!!!!!!!!!
Well here goes people i am now adding pictures see what you think!
SAW AND ITCHY!!!!
KEEP SCRATCHING!!!!!!!!
NEW WING SECTION MADE!!!!!
OOOH THAT FEELS GOOOD!!!!!!!!!
FRONT WING LOWER CORNER.
ABOVE HEADLAMP (EXTRA DRAINAGE LET IN)
Well there it is folks its taken me all b*****y night to sort these pictures out thank god i have finished, I shall tho' post some piccies of JDX AND FGU out together on a small run next week!!!
SHELLY