The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Project Dolomega, the next level
http://forum.triumphdolomite.co.uk/viewtopic.php?t=21480
Page 23 of 30

Author:  new to this [ Mon Jun 15, 2020 9:02 pm ]
Post subject:  Re: Project Dolomega, the next level

Quote:
Quote:
Steve

the reversing camera i bought one that is built in to the rear number plate surround, good idea about the light under bonnet

Dave
I have the later style number plate lights, so no housing to put it in!

The one that came with the stereo is very small and black in colour, it fits nicely under the lip of the bootlid and should be almost un-noticeable once the car is fitted up completely.

Steve
Steve

you miss under stand, its a souround that goes round the number plate and fitted on the back panel with reversing camera built in to it got it off Ebay

Dave

Author:  new to this [ Mon Jun 15, 2020 9:06 pm ]
Post subject:  Re: Project Dolomega, the next level

Quote:
How about a small roof console for storing things Steve? The sort you get on some moderns.

Tony.
I have a roof console in the van , trouble is go over speed hump and things jump out :evil: :evil:

Dave

Author:  Carledo [ Tue Jun 16, 2020 12:47 am ]
Post subject:  Re: Project Dolomega, the next level

Quote:
Quote:
How about a small roof console for storing things Steve? The sort you get on some moderns.

Tony.
I have a roof console in the van , trouble is go over speed hump and things jump out :evil: :evil:

Dave
I remember back in my very early days of motoring, you could buy these REALLY tacky, cheap, ABS plastic roof consoles that started above the mirror and ran back to behind your head, only along the car centerline and maybe 6" wide. but you could get a few switches in, maybe a couple of extra dials and a pair of little spotlight interior lights in the back end. The problem was, nothing much held them up, they were mostly glued to the headlining! So they'd fall in your lap at the worst moment!

I'm looking more at the gap between the front seats which is otherwise wasted space and possibly at a dropaway glovebox from something modern to go under the dash on the passenger side and a smaller version for the space on the outside of the steering column.

The trouble is, I don't even know if scrappies are open ATM and in any case, my long term favourite yard where I had "wandering" rights is now a storage facility!

My Peugeot Expert van has an ENORMOUS roof mounted shelf/cupboard above the screen, it's big enough to irretrievably lose stuff in, but the Dolomite roof wont accept anything nearly as capacious!

Steve

Author:  yorkshire_spam [ Tue Jun 16, 2020 12:01 pm ]
Post subject:  Re: Project Dolomega, the next level

Quote:
I'm looking more at the gap between the front seats which is otherwise wasted space and possibly at a dropaway glovebox from something modern to go under the dash on the passenger side and a smaller version for the space on the outside of the steering column.
I wonder if the Mk1 Freelander cubbybox thing would fit between the seats? Not much stowage, but better than nothing and would accomodate electric window switches and a charging point/fag lighter for the rear.

Author:  Carledo [ Tue Jun 16, 2020 1:28 pm ]
Post subject:  Re: Project Dolomega, the next level

Quote:
Quote:
I'm looking more at the gap between the front seats which is otherwise wasted space and possibly at a dropaway glovebox from something modern to go under the dash on the passenger side and a smaller version for the space on the outside of the steering column.
I wonder if the Mk1 Freelander cubbybox thing would fit between the seats? Not much stowage, but better than nothing and would accomodate electric window switches and a charging point/fag lighter for the rear.
I don't know how you worked this out or knew it somehow Sam, but it's pure genius!

I found a few on ebay and they look perfect for the job, have ordered one, complete with all switches and stuff for £30!

Steve

Author:  sprint95m [ Tue Jun 16, 2020 2:30 pm ]
Post subject:  Aye.....

Quote:
People may remember this from P19!

I fitted the spare pump and, almost immediately, it made horrible grinding noises,
You are having terrible luck there Steve.
:( Clearly your previous supplier has no interest in future business and is just taking the p155.

I had always thought they inline pumps were pretty durable, giving warning by getting noisier for a long time before failing.
The problem with them was that the outer casing corroded....
A friend got one for his Audi 100 from a Ford Granada taxi, that pump's casing had been repaired with glass fibre matting
but nonetheless ran well.

Sometimes it does pay to complain...
a friend had a Mondeo with a roof rack he couldn't remove because one of the captive nuts had become free.
The local Ford dealership had told him that this wasn't covered by warranty
so he asked me if it was repairable.
I told to first phone Ford UK direct and persist until you got someone who could authorise repairs, then inform
them that their cars are shite. Ford did agree to repair the car....



Ian.

Author:  dollyman [ Tue Jun 16, 2020 3:19 pm ]
Post subject:  Re: Project Dolomega, the next level

What make of Pump are you using Steve? A few people i know swear by "Osias" pumps and have been pleased with the results and they come with a 3year warranty.https://www.ebay.co.uk/itm/OSIAS-New-In ... SwO75dcuiO
Did you buy it off fleabay or a credit card? If you did and the pump is still in it's warranty period you will have some comeback on the supplier. It's a bit of a faff but depends how much it was.

Tony.

Author:  Carledo [ Tue Jun 16, 2020 8:31 pm ]
Post subject:  Re: Project Dolomega, the next level

Quote:
What make of Pump are you using Steve? A few people i know swear by "Osias" pumps and have been pleased with the results and they come with a 3year warranty.https://www.ebay.co.uk/itm/OSIAS-New-In ... SwO75dcuiO
Did you buy it off fleabay or a credit card? If you did and the pump is still in it's warranty period you will have some comeback on the supplier. It's a bit of a faff but depends how much it was.

Tony.
I can't now remember who supplied the pump for the Carledo that broke, that was back in 2010! But I DO remember vividly, that at the time, it was over £60 and I was livid that the guy cut it open, rather than releasing the crimped end! I did protest at the time, but he wasn't interested. So £60 went down the drain, the only consolation being the Renault Espace pump that is still on it was a freebie from a friend!

The last 4 pumps like this (early Cavs use the too) i've had are APS pumps from JCraceandrally on ebay (over 2100 sold, apparently) and up to now i've not had a problem. They are only a couple of quid less than the Osias pump you provided a link to, so if I get no joy here i'll go for one of those!

To be fair, the pumps I HAVE killed on the Dolomega probably WERE my fault, rust in the tank and no prefilter being the likely culprit. But this last one was duff out the box so definitely NOT my fault!

Steve

Author:  sprint95m [ Tue Jun 16, 2020 9:26 pm ]
Post subject:  Aye.....

Out of interest I did an ebay search and found this Steve
https://www.ebay.co.uk/itm/BOSCH-INLINE ... SwDZpevYjt

That is OE Saab I think?
They were long lived on Saabs.

(The very similar one to fit a Ford is £72 dearer).



Ian.

Author:  yorkshire_spam [ Wed Jun 17, 2020 9:04 am ]
Post subject:  Re: Project Dolomega, the next level

Quote:
Quote:
Quote:
I'm looking more at the gap between the front seats which is otherwise wasted space and possibly at a dropaway glovebox from something modern to go under the dash on the passenger side and a smaller version for the space on the outside of the steering column.
I wonder if the Mk1 Freelander cubbybox thing would fit between the seats? Not much stowage, but better than nothing and would accomodate electric window switches and a charging point/fag lighter for the rear.
I don't know how you worked this out or knew it somehow Sam, but it's pure genius!

I found a few on ebay and they look perfect for the job, have ordered one, complete with all switches and stuff for £30!

Steve
I just hope it fits Steve!

Author:  dollyman [ Wed Jun 17, 2020 10:40 am ]
Post subject:  Re: Project Dolomega, the next level

To be fair, the pumps I HAVE killed on the Dolomega probably WERE my fault, rust in the tank and no prefilter being the likely culprit. But this last one was duff out the box so definitely NOT my fault!

Steve
[/quote]

For some reason they all use a Vectra fuel filter for their cars as well?

Tony.

Author:  Carledo [ Thu Jun 18, 2020 3:26 am ]
Post subject:  Re: Project Dolomega, the next level

Quote:
To be fair, the pumps I HAVE killed on the Dolomega probably WERE my fault, rust in the tank and no prefilter being the likely culprit. But this last one was duff out the box so definitely NOT my fault!

Steve
For some reason they all use a Vectra fuel filter for their cars as well?

Tony.
[/quote]

Depends which Vectra, some of the newer ones have a diesel like filter with a replaceable element.

I have a Corsa one further downstream from the pump, the prefilter is to replace the mesh bit that would normally sit over the business end of an in-tank pump, something the Dolomite tank can't supply. With that in place, I probably don't really NEED the Corsa one on the pressure side, but I can't be bothered to delete it now!

Steve

Author:  Carledo [ Thu Jun 18, 2020 3:30 am ]
Post subject:  Re: Project Dolomega, the next level

Quote:
Quote:
Quote:

I wonder if the Mk1 Freelander cubbybox thing would fit between the seats? Not much stowage, but better than nothing and would accomodate electric window switches and a charging point/fag lighter for the rear.
I don't know how you worked this out or knew it somehow Sam, but it's pure genius!

I found a few on ebay and they look perfect for the job, have ordered one, complete with all switches and stuff for £30!

Steve
Don't worry Sam, I won't blame you if it doesn't! But it looks narrow enough and the gap for the handbrake looks to be in about the right place. I may have to make some gaps for the seat belt stalks to emerge - or I may not! I'll find out soon enough!

Steve

I just hope it fits Steve!

Author:  Carledo [ Thu Jun 18, 2020 4:26 am ]
Post subject:  Re: Project Dolomega, the next level

A postscript to my fuel pump post, after a conversation by email including sending pics of the pump installation and confirmation of the prefilter i'm using, the supplier has agreed to send me another FOC. Didn't even ask for the duff one back! Miuch better service than the last cowboy!

Steve

Author:  new to this [ Thu Jun 18, 2020 9:21 pm ]
Post subject:  Re: Project Dolomega, the next level

Steve

how are you doing the electric windows buying a kit or fitting a motor to dolomite window mech ?

Dave

Page 23 of 30 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/