The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Tue Mar 19, 2024 2:21 am

All times are UTC




Post new topic  Reply to topic  [ 328 posts ]  Go to page Previous 117 18 19 20 21 22 Next
Author Message
PostPosted: Tue Jul 03, 2018 11:01 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
Yep, completely agree with Steve as well Raf.

Sam, Binnys rad came from the same bloke so it will be the same as DTR.

I have one coming from GAT Rads with the help of Alun, he says the old chap knows his stuff and I trust the old man, Alun that is! :lol: :lol: :lol:

Lets keep the hot weather coming so I can test it!


Top
   
PostPosted: Wed Jul 04, 2018 9:12 am 
Offline
TDC Member
User avatar

Joined: Wed Nov 15, 2017 3:35 pm
Posts: 956
Location: Filey, North Yorkshire
Let me know how you get on with the replacement rad - I might have to consider the same route for Binny.... I'm not sure my heart can take the stress of constantly watching the temp gauge all the way round the RBRR!

_________________
Image


Top
   
PostPosted: Sun Jul 08, 2018 12:52 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
It is hot! The Land Rover is parked in the shade and the thermometer says it's 32 degs, this corresponds with my weather station thingy which says its 35 ambient.

Excellent! :D

A huge thanks to Alun for taking a core and collecting my radiator from GAT Radiators in Brierley Hill.

Yesterday afternoon I pulled the old one out and compared, you can clearly see the difference, the new one also weighs considerable more.

Image

Image

Image

Fan back on and new rad in!

Image

On to filling, I have got this down now thanks to Jonners and his method which I have adapted a bit.

HEATER ON HOT!!!! :oops:

I fill it up using a funnel specially cut down to it fits in the filler hole. I deliberately over fill leaving plenty in the funnel as a head, then gently squeeze all of the hoses being careful not to pull any expelled air back into the system.

Take your time! relax whilst doing it, have a beer or if you dont drink, a cup of tea!

Go back and do the same again! You'll be suprised how much of the fluid in the funnel disappears into the engine.

Image

Image

Then I drain off anything left in the funnel, remove it, top off and fit the filler plug.

Start the car and run it for 3 minutes.

Stop, remove the filler cap, refit funnel top off again leaving plenty in the funnel and re squeeze all the hoses.

Once the air bubbles have stopped, drain off, remove funnel, top up and refit the filling cap.

Top up expansion tank if necessary, run up hot, check for leaks.

Go get yourself a beer because that's a job well done! :lol:


Top
   
PostPosted: Sun Jul 08, 2018 12:58 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
So back to the heat! It's around 33 degs so I ran the car down the M3 and back, about 25-30 miles or so in the traffic at various speeds up to a good 80 or so.

Temperature gauge was well under 3/4 and the car felt happier and the heater was off.

So given the temperature I would expect some expect needle movement and this is now acceptable to me.

Coming off the motorway onto 50/60 mph roads and the needle dropped to just over half way, quickly as well.

I'm happy with that.

All I need to do now is to set the temperature that the fan cuts in. Currently if I'm on the motorway it will be constantly on, so I think I have it set to come on at too low temperature.

I think if I set it to come in when the needle is closer to 3/4 then it would probably just cut in and out rather than trying to get the engine temp back down to half again.

Have to have a think about it.


Top
   
PostPosted: Sun Jul 08, 2018 1:29 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
Am I right in thinking that export cars destined for hot countries had this little section behind the bumper removed?

Image


Top
   
PostPosted: Sun Jul 08, 2018 1:55 pm 
Offline
TDC Member
User avatar

Joined: Mon Aug 10, 2015 8:20 pm
Posts: 1293
Location: Shetland / here & there
This might help?
Image

_________________
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3


Top
   
PostPosted: Sun Jul 08, 2018 2:56 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Wed Jul 22, 2015 12:58 pm
Posts: 1293
Location: London
Quote:
This might help?
Image
I was looking at retrofitting an a/c, according to that bulletin one may have been designed.

_________________
NRW 581W Sprint


On the motorway no one can hear me sing!
Construed as a public service, self preservation in reality.


Top
   
PostPosted: Sun Jul 08, 2018 9:44 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7005
Location: Highley, Shropshire
This bodge (which is what it IS) is a probably useless attempt to combat vaporisation (it SAYS its for rough running due to high underbonnet temps) in areas of high ambients.

Opening out that slot and other small frontal areas will do virtually NOTHING because it's not so much that the air can't get in, it's that it can't get OUT!

The quick and cheap cure is to pop the bonnet when sat in traffic, Rather more expensive, but permanent, is to put a set of louvres in the rear end of the bonnet! This will improve airflow through the rad, combat vaporisation by giving the hot air that would normally accumulate around the carbs an escape route and even help clear the screen on frosty mornings!

Of course, the extra holes that I have put in my car DO help a bit (and they look cool too!) but mine has a Saab rad which sits lower, so more of the rad is behind the standard metal! Also, I have EFi, so vaporisation is not an issue! Plus I've had to get creative with the front number plate too! PFA!


Image

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Sun Jul 08, 2018 9:58 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7005
Location: Highley, Shropshire
Thinking about electric fan activating temperatures, I would throw caution to the winds and have it come IN at 3/4 on the guage and drop out again a tad OVER 1/2!

An electric fan controls the temperature MUCH more accurately and reliably than ANY sort of engine driven fan can ever do. So you don't NEED the margin of error that is built into engine driven systems and can AFFORD to let the motor run hotter (and therefore more efficiently) than would normally be the case with a standard car. You just have to overcome the personal paranoia that is the birthright of all Dolomite enthusiasts! An electric fan fitted car will display a much wider range of readings than a standard one (where the aim is "rock steady in the middle at all times") You just have to get used to the fluctuations, difficult as that is!

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Mon Jul 09, 2018 10:15 am 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
Thanks Steve!

Alun has mentioned that hes not too happy with the temp readings given the size of the new rad. This morning I tested the voltage stabalizer and it reads a solid 9.8 volts output. I have sourced a NOS Smiths one which I will test for comparison.

As for the temperature sender, it is a new one from Robsport. I have also been able to source a new old stock correct Smiths one from eBay (for NWL actually!) so when it arrives will be able to do a comparison.

Tony will have to tell me how to do that!! :lol:


Top
   
PostPosted: Mon Jul 09, 2018 10:25 am 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
Quote:
I was looking at retrofitting an a/c, according to that bulletin one may have been designed.
The TR7 came with AC as an option in the US Mahesh, have a look at that.
Quote:
Rather more expensive, but permanent, is to put a set of louvres in the rear end of the bonnet! This will improve airflow through the rad, combat vaporisation by giving the hot air that would normally accumulate around the carbs an escape route and even help clear the screen on frosty mornings!
And they look cool!

I have a spare bonnet that has a small rust hole in that area, I'm going to give them a go! 8)


Top
   
PostPosted: Mon Jul 09, 2018 12:21 pm 
Offline
TDC Staffs Area Organiser
User avatar

Joined: Wed Oct 18, 2006 2:08 pm
Posts: 5429
Location: The Old Asylum
As per my Facecloth post, do consider your spark plugs. Cooler running plugs made a huge difference to my Sprint. I think the standard NGK plug usually listed is a BP6EFS but I used a BP7EFS which is closer to the original spec in terms of heat range.

_________________
Mark

1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30


Top
   
PostPosted: Mon Jul 09, 2018 12:46 pm 
Offline
TDC Member
User avatar

Joined: Wed Jul 04, 2007 12:27 pm
Posts: 1904
Location: Hampshire
Currently it has BP5ES' in it, which is fine for a lot of short town driving but out on the motorway it could be a bit too hot so switching out to a 6 or even 7 as you say may help.

It's a cheap easy switch so I cant see the harm in giving it a go!


Top
   
PostPosted: Mon Jul 09, 2018 7:04 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Thu Oct 06, 2011 1:13 am
Posts: 3173
Location: The continent
A 7 is too cold.

Jeroen

_________________
Classic Kabelboom Company. For all your wiring needs. http://www.classickabelboomcompany.com


Top
   
PostPosted: Mon Jul 09, 2018 8:19 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Wed Jul 22, 2015 12:58 pm
Posts: 1293
Location: London
So a 5 is too hot, and a 7 too cold, a 6 should be just right, (couldn't help it) :D

Saying that my car seems to prefer NGK BPR6EFIX10 Iridiums over standard.

_________________
NRW 581W Sprint


On the motorway no one can hear me sing!
Construed as a public service, self preservation in reality.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 328 posts ]  Go to page Previous 117 18 19 20 21 22 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited