The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Tue Mar 19, 2024 9:24 am

All times are UTC




Post new topic  Reply to topic  [ 71 posts ]  Go to page 1 2 3 4 5 Next
Author Message
PostPosted: Wed Sep 26, 2018 10:32 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
Time to make a restoration thread. I think this is a strong contender for the longest ever restoration, 36 years so far...

The Toledo was bought new by my father in 1971, so it's a one family car. It's a fairly early 2 door short bumper Toledo in laurel green, with drum brakes all around and no brake servo, so quite rare now.

I don't have a huge number of photos of the car when it was on the road, but I've got a couple from the late 70s on regular trips to Sweden. In those days you could get a ferry directly from the UK to Gothenburg, so it's a little less driving than it is now, but still quite a journey for a little Toledo.

Image

The Toledo was parked in the garage in 1982 with 110 000 miles on the clock for a light overhaul due to rust, although this turned out to be significantly worse than originally thought.

This photo was taken around 1995.

Image

The Toledo was parked in the garage before I was born and is around 15 years older than I am. I have no experience with classic cars although I am fairly practical and not afraid to read instructions. I had never driven a car with a manual choke until a few month ago. I started working hard to get the Toledo back on the road at the start of 2018. I didn't know what points, condensers or inches were back then, so it's been quite a learning curve over the last few months :)

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Mon Mar 27, 2023 12:24 am, edited 10 times in total.

Top
   
PostPosted: Wed Sep 26, 2018 10:40 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
Around 1996 stripping was in progress, revealing the full extent of the rot.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Sat Nov 09, 2019 10:13 pm, edited 7 times in total.

Top
   
PostPosted: Wed Sep 26, 2018 10:43 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
A very young version of me degreases the engine and gearbox around 1996

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Thu Dec 20, 2018 12:00 am, edited 2 times in total.

Top
   
PostPosted: Wed Sep 26, 2018 10:52 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
In the early 2000s, the Toledo was welded. Extensively.

Image

Image

Image

Image

And a new front valance was added. Not too sure where this came from, I'm not sure if it's a repro or NOS panel.

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Sat Nov 09, 2019 10:13 pm, edited 6 times in total.

Top
   
PostPosted: Thu Sep 27, 2018 6:57 am 
Offline
TDC Member

Joined: Fri Jan 08, 2016 9:00 pm
Posts: 1014
Fantastic pictures, thanks for taking the time to share. Keep them coming. :D


Top
   
PostPosted: Thu Sep 27, 2018 11:17 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
Thank you GTS290N and Mad sheep. I have lots lots more photos to go :) I do have hankerings about building a 2 door magenta Toledo TS after I've finished this, but that depends on finding the right donor car and winning the lottery :)

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Top
   
PostPosted: Thu Sep 27, 2018 11:21 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
So by 2010 the car was starting to look like a car again, but there was several problems. It had been painted in cellulose, the doors hadn't been painted, or the front wings, boot and bonnet. My dad claimed he was going to bolt the front wings on but I don't see how this was ever going to work.

Also the engine had been put back together, but never run. All fluids had also been put back in including coolant.

Image

Image

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Mon Mar 27, 2023 12:25 am, edited 3 times in total.

Top
   
PostPosted: Thu Sep 27, 2018 11:39 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
By 2018 it became clear that it was going to be up to me to get the car back on the road. Not having much time or experience, I wanted a Triumph specialist to help me getting the engine running again.

Unfortunately however by this point the engine had seized. I took the spark plugs out and the amount of rust did not look healthy. Coolant had been put into the car in 2010 but I am guessing that the head gasket leaked and allowed water into the bores. I took the head off to fully assess the damage. Despite several weeks soaking in Plusgas the pistons wouldn't budge. The whole sorry lot was carted off to a Triumph specialist. They had to hammer the pistons out of the bores, they were so badly rusted. Ouch.

Pro tip: don't leave coolant in an engine especially one that's not been run, so doesn't have a protective layer of oil and carbon.

Image

Image

Image

Image

Image

Image

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Mon Mar 27, 2023 12:26 am, edited 2 times in total.

Top
   
PostPosted: Fri Sep 28, 2018 10:14 am 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
Now onto the start of some good news! In March 2018 the engine was fully rebuilt by JY classics

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

And the engine ran for the first time in 36 years: video1, video2. (I'm not sure I can embed YouTube videos here).

Meanwhile I had a 12 week battle with the DVLA to reinstate the registration number as being offroad since 1982 Ernie missed going onto those new-fangled computer things. I only had an old style registration document, no V5. But after the DVLA kept making it up as they went along for 12 weeks, I was eventually awarded with a fresh new V5.

Image

Keeper number 1, my dad.

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Sat Sep 19, 2020 4:47 pm, edited 1 time in total.

Top
   
PostPosted: Sun Sep 30, 2018 11:08 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
After the engine was rebuilt I there was still the issue of finishing the bodywork (doing things in the wrong order for complicated family reasons). Namely attaching the front wings, painting the boot, bonnet and doors. I also decided that the quality of the paint job was disappointing, it was cellulose done in a garage. I am a bit of a perfectionist.

Given that the paint was badly chipped despite only ever having been in a garage, I suspect the cellulose didn't adhere to the primer. So, out with the engine again and off to the body shop for painting in two pack and attachment of the front wings.

Image

Image

Image

Image

Image

Image

Image

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Last edited by 2door-toledo on Sat Dec 15, 2018 1:10 am, edited 2 times in total.

Top
   
PostPosted: Fri Oct 05, 2018 3:23 pm 
Offline
TDC Member

Joined: Fri Apr 13, 2018 11:38 pm
Posts: 117
Location: Berkshire
The gearbox, diff and propshaft are the elephants in the room. I don't know what state they were in when the car was laid up in 1982. It seems a shame to put them back on the car in the hope that they work. Conversely, they might be absolutely fine and I don't want to try and rebuild things that aren't broke. The oil seals in the gearbox and diff are a concern to me though. From reading the workshop manual disassembly of the diff is definitely not something I want to get involved with.

I still haven't decided what to do here.

In the mean time I've been working on prepping the suspension and subframe ready for paint tomorrow.

They've been taken back to bare metal, thoroughly degreased and then treated with POR15 metal prep.

Image

Image

With hindsight, I'd have got them media blasted.

_________________
Cheers,
Chris

1971 Triumph Toledo 2 door
1977 Triumph Stag
Toledo blog, Toledo & Dolomite part catalogues & repair manuals


Top
   
PostPosted: Fri Oct 05, 2018 4:53 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1696
Location: Harrow Middlesex
there's a lot of bits there :D keep the pictures coming

Dave


Last edited by new to this on Fri Oct 05, 2018 7:55 pm, edited 1 time in total.

Top
   
PostPosted: Fri Oct 05, 2018 5:18 pm 
Offline
TDC Member

Joined: Thu May 10, 2012 8:08 pm
Posts: 192
Great thread, well done and as Dave says, keep those pictures coming!

Keith


Top
   
PostPosted: Tue Oct 09, 2018 8:32 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Wed Oct 04, 2006 7:45 pm
Posts: 1282
Location: East Lothian, Scotland
It looks like this will be a fantastic car once you have completed it. Great to have the family history, too.

_________________
1959 TR3A, 1970 Triumph 1300, 1974 Toledo
Image Thanks Photobucket :(


Top
   
PostPosted: Wed Nov 14, 2018 9:48 pm 
Im at about the same stage with my front suspension / subframe. I'm going to get all the bits vapour blasted and then I will probably paint them myself - not sure I might get it done professionally. Good luck with your project, looking forward to seeing more pictures!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 71 posts ]  Go to page 1 2 3 4 5 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited