Has anybody got a clutch master cylinder out of a 1500 where they can measure the dimensions of the operating fork which connects the master cylinder to the clutch pedal.
I have two here which have different measurements. The one that was fitted to the car measures 1 inch and 5/8ths between the arrows shown in the photograph and a second which measures 1 inch and 3/4 between the arrows. Both are badly worn.
I have welded plates to the outside of the forks of the longer unit but I have not yet drilled it 5/16 to take a new clevis pin.
The hole needs to be in the right position so that the clutch will disengage when I depress the pedal, something it will not do at present with the worn clevis pin and fork, and some mild wear in the clutch pedal itself.
Robert
| Attachments: |
|
20190112 1500 clutch fork dimensions.jpg [ 91.59 KiB | Viewed 364 times ] |