The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Hello - Barn Find 1980 Dolomite 1300
http://forum.triumphdolomite.co.uk/viewtopic.php?t=34720
Page 1 of 1

Author:  nick_smith [ Fri Feb 08, 2019 1:23 pm ]
Post subject:  Hello - Barn Find 1980 Dolomite 1300

Hi all,

Thought I would take the opportunity to introduce myself.

I recently acquired a 1980 Dolomite 1300 found in a barn and will be restoring over the next year or two.

 I look forward to sharing my progress. 
Image

Author:  ragtop [ Fri Feb 08, 2019 6:31 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Welcome to this Triumph world. That looks like a good car, it looks to be light rust on there. I look forward to more updates. Alan

Author:  dollyman [ Fri Feb 08, 2019 7:03 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Hi, welcome to this forum as well :D You cant have to many people guiding you along, proper barn find :suntan:

Tony.

Author:  Awaiting Repair [ Fri Feb 08, 2019 8:55 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Great stuff! Well done on taking up the challenge! Look forward to updates on your progress. Don't forget the photos!!!

Cheers
Keith

Author:  nick_smith [ Mon Feb 11, 2019 10:41 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

First day spent freeing the brakes, removing from barn and cleaning about 20 years of dirt off. See the progress below:

Image

Author:  dollyman [ Tue Feb 12, 2019 10:46 am ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Does'nt look to bad now all the crap is off Nick :D Have you tried to start it yet?

Tony.

Author:  nick_smith [ Tue Feb 12, 2019 2:59 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Quote:
Does'nt look to bad now all the crap is off Nick :D Have you tried to start it yet?

Tony.
Not yet Tony. Ordered points and condenser and will pick up some petrol and then see what we’re dealing with

Author:  nick_smith [ Wed Feb 20, 2019 8:03 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Quote:
Quote:
Does'nt look to bad now all the crap is off Nick :D Have you tried to start it yet?

Tony.
Not yet Tony. Ordered points and condenser and will pick up some petrol and then see what we’re dealing with
Now up and running :D

Author:  nick_smith [ Wed Feb 20, 2019 8:23 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Hi guys,

After getting the 1300 running, I'm after a few parts so I can begin to drive it and push closer to the MOT before undertaking any bodywork. My next area of focus is the clutch hydraulics. I am after a both master and slave cylinders and have created a summary of my intial sourcing research below.

I'm new to Dolomites! Does anyone know if I have explored all the avenues? Any advice on how to differentiate the clutch cylinders currently on the market would be much appreciated!
----------------------------------------------------------------------------------
Canley Classics

Clutch Slave Cylinder £39.98 (https://www.canleyclassics.com/triumph- ... mite-parts)

ANG Classic Car Parts

Clutch Master Cylinder £57.95 (https://www.angclassiccarparts.co.uk/pr ... 300-1850hl)
Clutch Slave Cylinder £40.27 (https://www.angclassiccarparts.co.uk/pr ... 0hl-toledo)

Rimmer Bros

Clutch Master Cylinder £47.40 (https://rimmerbros.com/Item--i-GMC1023)
Clutch Slave Cylinder £60.00 (https://rimmerbros.com/Item--i-GSY105)

Ebay (all Master)

Borg & Beck via doctor_car £60.62 (https://www.ebay.co.uk/itm/Clutch-Maste ... %7Ciid%3A1)
Borg & Beck via kmspartsonline £59.58 https://www.ebay.co.uk/itm/New-Genuine- ... %7Ciid%3A1)
Triumph Recycler £22.49 (https://www.ebay.co.uk/itm/MASTER-CYLI ... %7Ciid%3A1)

Author:  soe8m [ Wed Feb 20, 2019 10:24 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

All I can advise is to buy nos girling or lockheed parts recognised by girling or lockheed in the casting itself. All others are Chinese reproductions which internals will solve when in contact with brake fluid....

Genuine new borg and beck is also genuine Chinese.

Jeroen

Author:  RSi [ Thu Feb 21, 2019 5:55 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Looks a good straight car, nice panels line ups :) What's its history?

Author:  nick_smith [ Fri Feb 22, 2019 11:12 am ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

Quote:
Looks a good straight car, nice panels line ups :) What's its history?
The first owner acquired it in 1980 and kept a detailed service record book until the second owner acquired it via a used car garage in 1990. They kept service record book up to date until they sought something safer for their young family in the late 90s. It spent a few years garaged and was then moved into the barn above, where I stumbled across it. I became the proud owner back in the summer of 2018 and recently moved it to drier and warmer surroundings where I can tinker.

Author:  TrustNo1 [ Sun Apr 21, 2019 2:27 pm ]
Post subject:  Re: Hello - Barn Find 1980 Dolomite 1300

first port of call would be Canleys then ANG, I'm not allowed to tell you to avoid Rimmers so I won't tell you that but personally I wouldn't use a company who charge more for inferior products.(that's my own personal opinion)
If you can buy NOS Girling. if the bores are ok you can reseal them of if you are a TDC member the club sell resleeved units, they aren't cheap but you'll fit it once and forget about it.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/