The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
SprintV8 going 13B Rotary http://forum.triumphdolomite.co.uk/viewtopic.php?t=35342 |
Page 1 of 7 |
Author: | SprintV8 [ Mon Oct 07, 2019 5:00 pm ] |
Post subject: | SprintV8 going 13B Rotary |
As some of you are aware my old V8 Sprint is back in my possession. It will be getting a 2007 Mazda RX-8 13B Rotary engine. I’ll post updates as and when. Currently having a bit of rust repair done. |
Author: | dollyman [ Tue Oct 08, 2019 11:10 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Can't wait for this thread to get going Tony. |
Author: | Carledo [ Tue Oct 08, 2019 8:35 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
There is a Mazda rotary powered Toledo drift car in New Zealand I think. I've seen a youtube film of it drifting around, seems absolutely awesome! Can't wait to see how this one turns out! Steve |
Author: | SprintV8 [ Wed Oct 09, 2019 9:32 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
There’s quite a few Rotary powered cars in New Zealand and Australia. They tend to use the earlier RX7 engine as it’s less restricted in standard form than the later RX8 that I have. Note should of got the earlier engine. And they love a Big Turbo out there. Found the YouTube Link That’s the earlier 12a engine which is smaller. https://youtu.be/MUZSSu4cQgI |
Author: | dollyman [ Wed Oct 09, 2019 10:40 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
I forgot how nice those engines sound..... Brilliant Tony. |
Author: | SprintV8 [ Wed Nov 20, 2019 1:13 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Having problems with DVLA Because I marked the green slip as export all those years ago They are now saying I have to re registered the Sprint. Despite letter from previous owner confirming it never left the UK. If I don’t get the original reg back. I’ll still be displaying the PRO plate at shows. More work in the Sprint tomorrow. |
Author: | marshman [ Sun Nov 24, 2019 8:42 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
A couple of years ago I "re-imported" a Peugeot 106. It was on Southern Irish plates. The DVLA simply re-issued the original registration. They said as long as they have not reissued the original reg. it will be reallocated to the car if it is re-registered in the UK. It has to be issued with an age related plate anyway. So you should be OK. Can't remeber what form I had to fill in, also seem to remember that they wanted me to get it MoT'd first, the MoT station had to use the VIN as the ID and not the Irish reg no. Roger |
Author: | SprintV8 [ Fri Dec 20, 2019 5:18 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Slowly getting somewhere with DVLA HMRC They have agreed to register the Sprint with the PRO plate. But needs to be MOT first To show its roadworthy.. Best get my skates on and finish her. |
Author: | SprintV8 [ Sun Feb 02, 2020 2:57 pm ] | ||
Post subject: | Re: SprintV8 going 13B Rotary | ||
Haven’t done much recently as work has been quite busy. Engine mountings are in progress of being made Done the plate that mounts to the engine for the near side. Not happy with the one for the offside. So having a plate laser cut for the offside. Sorted out a RX8 gearbox conversion crossmember Which should save me bit of time making one from scratch. Onwards and upwards as they say.
|
Author: | SprintV8 [ Wed Mar 25, 2020 9:05 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Short update. Gearbox Mounting Done Nearside Engine Mount Done Offside Engine Mount done. But it’s all mounted Say Done just need to to Gussets Tidy and painted. Still lots to do. |
Author: | SprintV8 [ Fri Jun 05, 2020 9:48 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Not much off a update really. Measured up the prop length today. As the Engine and Gearbox are in there final positions. Ordered up some Exhaust bends and pipe for the manifold. Damm RX8 Carbon prop is about 50mm too long. |
Author: | SprintV8 [ Wed Jun 24, 2020 10:54 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Short update. Propshaft done. Completely all new Ends, greaseable UJs and Steel tube. Rx8 gearbox to Sprint diff. Modified oil pump from the good old USA. And found a company in the UK to regrind the Rotor Housing. For the tweaked engine that’s going in later. |
Author: | yorkshire_spam [ Thu Jun 25, 2020 12:58 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Nice to hear about some progress! |
Author: | SprintV8 [ Fri Jul 03, 2020 5:49 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Exhaust Manifold now we’ll on its way now.. Sort out Flange or slip joint to down pipe. Even gave the Sprint its first wash since coming back. |
Page 1 of 7 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |