The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
SprintV8 going 13B Rotary http://forum.triumphdolomite.co.uk/viewtopic.php?t=35342 |
Page 4 of 7 |
Author: | yorkshire_spam [ Wed Jul 14, 2021 11:25 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Coming along nicely! |
Author: | SprintV8 [ Wed Sep 08, 2021 9:56 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Not much to update at the moment. Having to change the pedal assembly back to Sprint Clutch and Brake. The Wilwood setup just isn’t going to work as I’m changing the steering column to the RX8 item, As I intend to use the RX8 loom standard ECU for now and the immobiliser. If anyone needs a Wilwood 3 cylinder brake pedal assembly with brackets, Hangs off the original brake pedal with support brackets as well let me know. I’ll also post photos later. Reconditioned Servo and Brake master cylinder via Club Spares thanks also to Alun. Now have a steering bump gauge so can also finalised the steering rack position. Spare set of stag wheels also collected which will be fitted with the Toyo tyres. Once I’ve decided what colour diamond cut and Gloss back or something else?. |
Author: | SprintV8 [ Tue Nov 02, 2021 6:13 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Many hours spent getting the Steering Rack (Escort Mk2 Quick Rack) in the correct position. Using the Bump Steer Gauge and repositioning the Rose Jointed track rod ends. Extra support also made to support the rack more. Thanks to Alun for the Club refurbished Master and Servo. Feels like a major hurdle passed. Couple more plates to fabricate then seam weld the subframe fully. Uprights and suspension arms all removed and will be cleaned and painted. |
Author: | SprintV8 [ Tue Nov 30, 2021 5:45 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Bit of update. Having to remake the offside engine Mount. Which I thought I would have to anyway. Going to be more under the exhaust Manifold rather than sticking out the front. Which should balance the engine better especially if I have to pull the gearbox out for any reason. |
Author: | SprintV8 [ Mon Jan 31, 2022 11:24 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Mk2 Rotary Cortina. https://youtu.be/Vvrh6WSKyvI |
Author: | SprintV8 [ Mon Jun 13, 2022 10:13 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Not really much of a update. Been tinkering around with the suspension and steering getting it all correct for hopefully the final weld up. Photos will be updated soon hopefully. |
Author: | SprintV8 [ Tue Aug 09, 2022 9:49 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Managed to get a few more hours on the Sprint. Subframe has been modified to accept the Escort Quick Rack. Rear facing torque arms Revised location of the front anti roll bar the ends will now take off the top arms. Mountings for the engine are now finalised. All now need checking then final clean up and painting. Next jobs are positioning the Oil coolers and the radiator makes the brackets etc. |
Author: | Carledo [ Wed Aug 10, 2022 2:09 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
I hate to say this, but merely reversing the balljoints is going to ruin your steering geometry vis-a-vis the "Ackerman angle" I'll do a drawing tomorrow to explain how it works! Steve |
Author: | SprintV8 [ Wed Aug 10, 2022 5:45 am ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Steve. I do understand the Ackerman principle. Straight line running thru the Track Rod End and Ball joint Centre. Ending to the centre of the axle. Allowing the inner wheel a tighter angle on lock. I do have something else in mind but at the moment this should be okay for now. Someone did do a macphersen strut option. That could change the steering arm angle. I would like to keep the Stag Wheels thought. |
Author: | SprintV8 [ Wed Aug 31, 2022 7:01 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Back from holibobs so managed some time on the Sprint today. Making a chance from the Steering/Suspension Engine. I thought I’ll work the placement for the twin oil coolers and radiator (All RX8 items). Roughly in position but going back tomorrow with the oil coolers hoses and fitting’s to check. Bonus looks like the supercharger may still be a possibility. Sprint been turned round so I can get to the rear to drop the axle. Check it over and fit the Rear disc conversion. Photos to follow. |
Author: | new to this [ Thu Sep 01, 2022 11:05 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Quote:
Not much to update at the moment.
I did mine grey just to be different, ive seen wheels paint the same colour as the car, but not keen
Having to change the pedal assembly back to Sprint Clutch and Brake. The Wilwood setup just isn’t going to work as I’m changing the steering column to the RX8 item, As I intend to use the RX8 loom standard ECU for now and the immobiliser. If anyone needs a Wilwood 3 cylinder brake pedal assembly with brackets, Hangs off the original brake pedal with support brackets as well let me know. I’ll also post photos later. Reconditioned Servo and Brake master cylinder via Club Spares thanks also to Alun. Now have a steering bump gauge so can also finalised the steering rack position. Spare set of stag wheels also collected which will be fitted with the Toyo tyres. Once I’ve decided what colour diamond cut and Gloss back or something else?. |
Author: | SprintV8 [ Thu Sep 22, 2022 9:15 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Twin oil coolers mounted. Oil lines will need to be shorten to length. Marked to the correct orientation and sent back to supplier for final cutting and crimping. Original RX8 Radiator top mounts sorted. Will sort the bottom mounts next. All will be boxed in so all the air flow will go though the rads. Steering column top Mount being fabricated to accept the RX8 column. As I’m using most of the RX8 loom. It will have the immobiliser and alarm from the RX8. Giving a little more piece of mind. |
Author: | killysprint [ Thu Sep 22, 2022 10:18 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Woooooaaaah. Can’t wait to see this finished Epic!!!! Just one thought have you considered your choice of wheels and tyres??? |
Author: | SprintV8 [ Thu Sep 22, 2022 10:31 pm ] |
Post subject: | Re: SprintV8 going 13B Rotary |
Quote:
Woooooaaaah. Can’t wait to see this finished
Staying with the Stag Alloys for now with very old Goodyear 185/60X14 tyres. Epic!!!! Just one thought have you considered your choice of wheels and tyres??? These tyres will be binned before she hits the road. My spare set of Stag Alloys have New Toyos Tyres. But I would like a set of Minilites 15” later on. |
Page 4 of 7 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |