The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Webers (new)
http://forum.triumphdolomite.co.uk/viewtopic.php?t=17015		 Page 2 of 2
Author:  Oli_88 [ Sun Jun 05, 2011 9:22 pm ]
Post subject:  Re: Webers (new)
Quote:
Quote:
Pump Jet - 150
Main Jet - 145
Emulsion Tube - F16
Air Corrector - 175
Idle Jet - 60/F8

Regardless of the fact that Italian and Spanish webers need totally different settings,+ you don't mention the choke sizes (32,33, 34,36?) never mind the DCOMS fitted to Peugeot & Citroen, which work completely differently? :roll:
*Cough*
Quote:
No is the short answer. I have a list of what I have on my Sprint, which would be a decent starting place, but you really need to get it on the rollers.
:roll: :roll:
Author:  ponchoj [ Wed Jun 22, 2011 4:48 pm ]
Post subject:  Re: Webers (new)
Quote:
Quote:
Pump Jet - 150
Main Jet - 145
Emulsion Tube - F16
Air Corrector - 175
Idle Jet - 60/F8

Regardless of the fact that Italian and Spanish webers need totally different settings,+ you don't mention the choke sizes (32,33, 34,36?) never mind the DCOMS fitted to Peugeot & Citroen, which work completely differently? :roll:
More rolling eyes? Seriously? :roll: :roll: :roll: :roll:

He's right though...Jet sizes mean absolutely nothing without the chokes, you couldn't even use them as a sensible base to start from.

The vacuum across the jets will change substantially just by changing the choke size a couple of mm.

Unless your chokes have been machined to size, they may well have the number cast into them. As above, they will be 32, 34, 36 etc. so it would be easy to add the choke size to the list, to give him a good place to start.



....and 4vman, at least he's contributing....
Author:  Mad Mart [ Wed Jun 22, 2011 6:11 pm ]
Post subject:  Re: Webers (new)
Terribly sorry old bean, it was a while ago that I posted on here. This was when I was running 36 chokes. :D
Page 2 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/