The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Rear brake disc conversion http://forum.triumphdolomite.co.uk/viewtopic.php?t=2157 |
Page 2 of 5 |
Author: | Neil907 [ Tue Dec 04, 2007 9:40 pm ] |
Post subject: | |
I belive he was thinking in comparison to the fronts which are only 222mm so that would be a big yes. |
Author: | DavePoth [ Tue Dec 04, 2007 9:53 pm ] |
Post subject: | |
11" rear discs... |
Author: | Lewis [ Tue Dec 04, 2007 9:58 pm ] |
Post subject: | |
So a hefty bias valve s'gonna be required for that hideously overbraked rear end then Looks great though! |
Author: | eightiesflamer [ Tue Dec 04, 2007 10:04 pm ] |
Post subject: | |
Dont think so Mr clever clogs, as I have a 300mm disc and alloy 4 pot caliper set up for the fronts. |
Author: | p collins [ Tue Dec 04, 2007 10:21 pm ] |
Post subject: | |
FORD ESCORT 1.6 FRONT SOLID DISCS DRILLED FOR DOLLY PCD AND GRANADA CALIPERS, FLAT PLATE 3 BOLTS ON AXLE TUBE 2 ON CALIPERS HANDBRAKE CABLES MADE UP TO SUIT EASY CONVERSION 10 YEARS AGO |
Author: | p collins [ Tue Dec 04, 2007 10:22 pm ] |
Post subject: | |
Quote: Dont think so Mr clever clogs, as I have a 300mm disc and alloy 4 pot caliper set up for the fronts.
Still need a bias valve
|
Author: | eightiesflamer [ Tue Dec 04, 2007 10:27 pm ] |
Post subject: | |
Well done |
Author: | p collins [ Tue Dec 04, 2007 10:45 pm ] |
Post subject: | Re: Rear disk/ford pcd conversion. |
[/quote] THE ESCORT 1.6 DISC PUTS THE CALIPER IN LINE FOR A SIMPLE FLAT PLATE. |
Author: | eightiesflamer [ Wed Dec 05, 2007 7:51 am ] |
Post subject: | |
Your drive flanges are not the same dimensions as mine although I will have a look at that option, will enable a flat caliper bracket. |
Author: | Sprint36 [ Wed Dec 05, 2007 8:14 am ] |
Post subject: | |
Coming along nicely there Darren. Nice axle! David |
Author: | eightiesflamer [ Wed Dec 05, 2007 1:12 pm ] |
Post subject: | |
Yes David, some geezer up north gave it to me, hav nt had a chrimbo card from him yet or an invite to the new year bash unless its in the post already. |
Author: | Sprint36 [ Wed Dec 05, 2007 1:25 pm ] |
Post subject: | |
Up North?! This is the East Midlands. When you getting your car back then? David |
Author: | eightiesflamer [ Wed Dec 05, 2007 3:15 pm ] |
Post subject: | |
Its home and being prep'd/pampered |
Author: | Sprint36 [ Wed Dec 05, 2007 4:07 pm ] |
Post subject: | |
Up and running with MoT and Tax? David |
Author: | eightiesflamer [ Wed Dec 05, 2007 6:05 pm ] |
Post subject: | |
Soon, you cant rush perfection as they say, anyway you have diversified from my original question, INVITE. |
Page 2 of 5 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |